-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
Orange Lithium Polymer battery Pack 2200mAh 2S 30C/60C (7.4V)
Safety Precautions :
- Avoid over-charging or over-discharging the batteries.
- Do n0t put it beside the high-temperature condition.
- Don’t throw it into the fire or Water
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹1,010.00 (excl. GST)Orange Lithium Polymer battery Pack 2200mAh 2S 30C/60C (7.4V)
₹1,010.00 (excl. GST) -
Lemon 2200mAh Lithium Polymer Battery Pack (3S 60C/120C)
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹1,684.00 (excl. GST)Lemon 2200mAh Lithium Polymer Battery Pack (3S 60C/120C)
₹1,684.00 (excl. GST) -
Lemon 2200mAh Lithium Polymer Battery Pack (3S 45C/90C)
Features:
- Guaranteed leak proof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹1,641.00 (excl. GST)Lemon 2200mAh Lithium Polymer Battery Pack (3S 45C/90C)
₹1,641.00 (excl. GST) -
XT90 Female Connector with Housing (1pcs)
Features:
- Plug Type: 5mm gold bullet connector in nylon shroud
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
₹38.00 (excl. GST)XT90 Female Connector with Housing (1pcs)
₹38.00 (excl. GST) -
XT90 Male Connector with Housing (1pc)
Specifications and Features:
- Metal connector size: 4.5mm
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
₹36.00 (excl. GST)XT90 Male Connector with Housing (1pc)
₹36.00 (excl. GST) -
Lemon 1550mAh 3S Lithium Polymer Battery Pack ( 45C/90C)
Features:
- Guaranteed leakproof operation in any position except inverted
- The expected life span of two to three years in float service applications
- Operation in a broad range of ambient temperatures
- Recovery capabilities even after deep discharges
- Compact, quick and simple to install, require low maintenance
₹1,420.00 (excl. GST)Lemon 1550mAh 3S Lithium Polymer Battery Pack ( 45C/90C)
₹1,420.00 (excl. GST) -
Orange Graphene 1300mAh 4S Lithium Polymer Battery Pack 100C/200C (14.8V)
Features :
- Product Type: Lithium Polymer Battery Pack
- The Orange LiPo battery has matched resistance.
- Good Temperature Control.
- Minimum weight in Class
₹2,670.00 (excl. GST)Orange Graphene 1300mAh 4S Lithium Polymer Battery Pack 100C/200C (14.8V)
₹2,670.00 (excl. GST) -
N20 3V 150RPM Micro Metal Gear DC Motor With Encoder
Features :
- Model: GA12 N20.
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
- Motor Size: 15 x 12 x 10 mm.
- Gearbox Length: 9 mm.
- Count: 3PPR(Pulse per Revolutions).
How to do wiring:
- Red – motor Power (Exchange can control the motor positive and negative rotation).
- Black – encoded power supply(VCC) – Positive (positive 3.3-5v).
- Yellow – signal feedback (motor turns 2 signals).
- Green – signal feedback (motor turns 2 signals).
- Blue – encoded power(GND).
- White – Motor power (Exchange can control the motor positive and negative rotation).
Dimensions :
₹310.00 (excl. GST)N20 3V 150RPM Micro Metal Gear DC Motor With Encoder
₹310.00 (excl. GST) -
N20 12V 300RPM Micro Metal Gear Motor With Encoder
Features :
- Model: GA12 N20.
- This is a DC Mini Metal Gear Motor, ideal for making robots
- Lightweight, high torque and low RPM.
- Fine craftsmanship, durable, not easy to wear.
- With excellent stall characteristics, can climb hills easily.
- You can also easily mount a wheel on the motor’s output shaft.
- Motor Size: 15 x 12 x 10 mm.
- Gearbox Length: 9 mm.
- Count: 3PPR(Pulse per Revolutions).
How to do wiring :
- Red – motor Power (Exchange can control the motor positive and negative rotation).
- Black – encoded power supply(VCC) – Positive (positive 3.3-5v).
- Yellow – signal feedback (motor turns 2 signals).
- Green – signal feedback (motor turns 2 signals).
- Blue – encoded power(GND).
- White – Motor power (Exchange can control the motor positive and negative rotation).
Dimensions :
₹310.00 (excl. GST)N20 12V 300RPM Micro Metal Gear Motor With Encoder
₹310.00 (excl. GST) -
Orange A Grade10Ah Prismatic LiFePO4 Battery-3.2V
Features:
- Safest Lithium Chemistry.
- High specific energy and High capacity.
- Long Life Cycles and extended shelf life.
- High capacity, low internal resistance, good coulombic efficiency.
- The orange team takes a great effort to meet projects on time.
₹2,900.00 (excl. GST)Orange A Grade10Ah Prismatic LiFePO4 Battery-3.2V
₹2,900.00 (excl. GST) -
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Green
Features:
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- No cracking problem and brittle issue
- Low material shrinkage rate, uniform diameter
Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
₹1,090.00 (excl. GST)eSun PLA+ 1.75mm 3D Printing Filament 1kg-Green
₹1,090.00 (excl. GST) -
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Orange
Features:
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- No cracking problem and brittle issue
- Low material shrinkage rate, uniform diameter
Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
₹1,090.00 (excl. GST)eSun PLA+ 1.75mm 3D Printing Filament 1kg-Orange
₹1,090.00 (excl. GST)
