-
1-8S Lipo Battery Voltage Tester
Features :
- Input: 1S-8S Battery
- Battery type: Lipo/LiFe/Li-ion/LiMn
- It has a Buzzer Alarm for low voltage indication.
- Useful for measuring each cell voltage.
- It has a mode button at the top for setting the desired voltage value.
₹154.001-8S Lipo Battery Voltage Tester
₹154.00 -
11.1V 2200mAh Lipo Lithium Polymer Rechargeable Battery
- Lithium-Polymer (Li-Po) Battery For RC, Planes and Drones
- 3 Cell (3S) 11.1V 2200MAH 35C
- Very Small in size and weight
- Connector Plug: XT60 Plug connector
- Discharge Current: 35*2200maH = 77Amp
₹1,500.00 -
11.1V 5400mAH LiPo Battery
- This is a 11.1V LiPo battery pack with a capacity of 5400mAh.
- It produces a maximum charging rate of 5C and maximum discharging rate of 40C.
- Experts recommend to maintain a charging rate of 1-3C for the5400mAh LiPo battery.
- Suitable for most RC models such as remote control racing drone, helicopter, car, boat, etc.
- Compatible with balance charger. Package Included : 1 x 5400mah lipo Battery
₹4,000.0011.1V 5400mAH LiPo Battery
₹4,000.00 -
12V 2A DC Power Adapter
- Universal
- Power Consumption: 60 W
- Power Cord Included
₹150.0012V 2A DC Power Adapter
₹150.00 -
18650 Battery Holder Case DIY Lithium Battery Box Battery Holder with Pin for 4 * 18650
- Size: As shown in images, suitable for 18650 lithium ion battery, Four Cell holder
- Color: Black; 1pcs 18650 Battery Holder Case Leads 3.7V Clip Type for Soldering / Connecting
- Material Type: Metal and plastic
- The package does not include battery of any type, only the cover.
₹72.00 -
18650 Battery Holder/Development Board Compatible With Raspberry Pi3B/3B+
Features:
- I2C Battery Monitoring
- Built-in Li-ion Battery Charging
- Can Supply up to 6A Output Current
- Supports Charging Current of 1A
₹160.00₹299.00 -
18650 Li-Ion Rechargeable Battery – 3.7V 3000mAH
Features:
1. High quality and durable
2. Provide excellent continuous power sources to your device
3. High energy density, large capacity and long life battery
4. No memory effect, recharge up to many times
5. Rechargeable type and professional design, safe and convenient to use₹125.00 -
1S 2A BMS Board 3.7V 18650 Lithium Battery Protection Board
Features:
- Easy to use
- Color: Green
- The internal resistance difference is not more than 5mQ
- BMS Li-ion Battery Protection Board
- The tolerance is less than 30mAh
- Single-cell consumption of battery (self-consumption): ≤3uA
- In this MOSFET are employed to do the monitoring task which protects our battery cells from overcharge
Precautions:1. Before installing the protection board, the battery should be matched well (the voltage difference between each battery should not be 0.05V, the internal resistance difference is not more than 5mQ, the tolerance is less than 30mAh), the smaller the battery voltage difference, the better the protection board will work. .2. The batteries are connected in parallel and then connected in series, and the welding is correct (18650 battery nickel spot welding, other batteries are soldered), do not screw, easy to burn the protection board IC.3. If it is an old battery change board, please pay attention: Please confirm the battery is normal before buying?4. When installing, use a multimeter to check whether the voltage of each string is the same. The performance failures with a difference of more than 1.0V are: running not far, starting and powering off, charging time is short, basically the battery core problem is more. The failure of the protection board is as follows: the battery cannot be charged, and the battery has a voltage and cannot be discharged.₹15.00 -
1S 3.7V 3A 2MOS BMS Li-ion 18650 Battery Protection Board
1S 3.7V 3A 2MOS
Features:
- Small size designed for a four-cell battery pack.
- Simple and convenient circuit for easy connections
- Over-charge/Over-discharge Protection.
- Pre-soldered Nickel Strip ready to mount on battery.
₹26.00 -
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
3 Series 20A 18650
Specifications:
Battery : 3 CellOvercharge detection voltage (V) : 4.25±0.025
Discharge voltage range (V) : 2.3 ~ 3.0±0.05v
Continuous charge current (A) : 20
Operational Temperature (°C) : -40 ~ +50
Length (mm) : 59
Width (mm) : 20
Height (mm) : 4
Weight (gm) : 4
₹70.00 -
5V 2Amp Adapter (5 V – 2 A DC SMPS)
- Compatible with Dth,STB,CCTV,toys,broad band,laptop,DVD,tablet,TV tuner card,cordledd phones,LCD moniter,scanner,cell phone,printers
- Dual Output Pin: DC Pin + Sony Pin
- Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.
- Simple to use, just plug-in, charge up and play
- The official power adapter allows you to charge your handheld console with any two-pin socket
- Compatible with Dth,STB,CCTV,toys,broad band,laptop,DVD,tablet,TV tuner card,cordledd phones,LCD moniter,scanner,cell phone,printers
- Dual Output Pin: DC Pin + Sony Pin
- Ideal for CCTV Cameras / Routers / Modems / Cordless Phones / Set Top Boxes / Wireless Devices / POS Machines etc.
₹150.00
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply & Prototypes
- Robotics & Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools & Equipment’s
- Bulk/Wholesale