-
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST)
- “1m Cable Drag Chain 10 x 15mm Wire Carrier” already exists in your wishlist
-
2mm x 3mm PTFE Teflon Tube
2mm * 3mm PTFE Teflon Tube has 2mm inner diameter and 3mm outer diameter. PTFE Tube to is used to get the best printing performance out of your 3D Printer. It increases print quality, reduces filament jams, and improves retraction.
₹52.00₹65.00(excl. GST)2mm x 3mm PTFE Teflon Tube
₹52.00₹65.00(excl. GST) -
LM35 TO-92-3 Board Mount Temperature Sensors
- Calibrated directly in Celsius (Centigrade)
- Linear + 10.0 mV/C scale factor
- 5C accuracy guaranteeable (at +25C)
- Rated for full −55 to +150C range
- Suitable for remote applications
- Low cost due to wafer-level trimming
- Operates from 4 to 30 volts
- Less than 60 µA current drain
- Low self-heating, 0.08C in still air n Nonlinearity only ±1⁄4C typical
- Low impedance output, 0.1 for 1 mA load
₹52.00 (excl. GST)LM35 TO-92-3 Board Mount Temperature Sensors
₹52.00 (excl. GST) -
₹50.00 (excl. GST)8 Channel Bi-Directional Logic Level Converter Module
₹50.00 (excl. GST) -
Round Plastic And Rubber Robot Track White Wheel 100x20MM
Applications:
- Light robotics applications
- Remotely Operated Robotic
- Vehicles and Belt/Tank style robot
₹50.00 (excl. GST)Round Plastic And Rubber Robot Track White Wheel 100x20MM
₹50.00 (excl. GST) -
1K ohm 5W Resistor (5 Pieces Pack)
Features
Electronics Components Passive Components Electronics Components Type Resistors Resistor Type Carbon Film Resistor Resistance Value 1 Ohms Power Rating of Resistor 5 Watt Tolerance 5% ₹50.00 (excl. GST)1K ohm 5W Resistor (5 Pieces Pack)
₹50.00 (excl. GST) -
GL-12 840 Points Solderless Breadboard
Features:
- 100% brand new and high quality
- Practical and useful
- Solderless breadboard with 840 points
- Completely reusable and have a self-adhesive back
- Easy component placement
₹50.00 (excl. GST)GL-12 840 Points Solderless Breadboard
₹50.00 (excl. GST) -
Glass Fuses 250V for Power Inverter
Features:
- Designed to UL/CSA/ ANCE 248 Standard
- Available in cartridge and axial lead format
- RoHS compliant and lead-free
₹50.00 (excl. GST)Glass Fuses 250V for Power Inverter
₹50.00 (excl. GST) -
Soldering Wick
The End Of A Length Of Braid Is Placed Over The Soldered Connections Of A Component Being Removed. The Connections Are Heated With A Soldering Iron Until The Solder Melts And Is Wicked Into The Braid By Capillary Action. The Braid Is Removed While The Solder Is
₹50.00 (excl. GST)Soldering Wick
₹50.00 (excl. GST) -
₹50.00 (excl. GST)L9110S H Bridge Stepper Motor Dual DC Driver Controller Module
₹50.00 (excl. GST) -
750K Ohm Carbon Film Resistor – Pack of 50 pcs
- Resistance Value: 750k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 750 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹50.00 (excl. GST)750K Ohm Carbon Film Resistor – Pack of 50 pcs
₹50.00 (excl. GST) -
470K Ohm Carbon Film Resistor – Pack of 50 pcs
- Resistance Value: 470k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 470k Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹50.00 (excl. GST)470K Ohm Carbon Film Resistor – Pack of 50 pcs
₹50.00 (excl. GST) -
330K Ohm Carbon Film Resistor – Pack of 50 pcs
- Resistance Value: 330k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 330 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistor
₹50.00 (excl. GST)330K Ohm Carbon Film Resistor – Pack of 50 pcs
₹50.00 (excl. GST)
