-
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST)
-
Flashforge Guider 3 3D Printer
The new machine structure design improves the utilization rate of the internal space of the equipment, realizes the expansion of the build volume while making the equipment occupying less space, offering flexible layout of the production line.
The entire frame adopts aluminum structure, and the enclosure adopts lightweight and durable ABS and acrylic sheets, which realizes the lightweight design from the inside out while ensuring stable printing as well.
- Excellent Printing Speed of up to 250mm/s
- Air Filtration
- Upgraded Automatic Leveling System
- Lightweight and Compact Design
- 300 x 250 x 340mm Build Volume
- Supported Filaments – ABS / PLA / PC / PA / HIPS / ASA / PETG / PA-CF / PLA-CF / PETG-CF /PETG-GF
- Â Close Design
- Â Auxiliary Leveling
- Â Filament Run Out Sensor
- Â Replaceable Print Bed
- Â Ultra Silence Design
- Â Continue Last Printing when Power Off
- Â Inbuilt Camera
- Â Wi-Fi, Ethernet, USB Stick Interface
- Â Air Filter Net
₹204,830.00 (excl. GST)Flashforge Guider 3 3D Printer
₹204,830.00 (excl. GST) -
Creality Sermoon D3 3D Printer
Features:
- High Precision Dual Extrusion: Create intricate multi-color or multi-material prints with exceptional detail.
- Large Build Volume: Print larger models or multiple objects in one go, expanding your creative possibilities.
- Silent Printing: Enjoy a quiet workspace with advanced stepper motor drivers for reduced operating noise.
- Touchscreen Interface: Intuitive and user-friendly, control and monitor your prints effortlessly.
- Filament Runout Sensor: Prevent print failures by detecting and pausing when filament runs out.
- Auto Bed Leveling: Effortlessly calibrate the print bed for optimal adhesion and accurate prints.
- Resume Print Function: Resume printing after power outages or interruptions, saving time and material.
- Network Connectivity: Print remotely and easily transfer files with the built-in Wi-Fi module.
- High Compatibility: Works with various filament types, offering versatility in material choices.
- Sturdy Metal Frame: Provides stability, durability, and precision for consistent results.
₹242,307.00 (excl. GST)Creality Sermoon D3 3D Printer
₹242,307.00 (excl. GST) -
Flashforge Creator 4 3D Printer
Features-
1. Extruder temp. reaches 360℃, new independently designed nozzle, print more types of models with less temp. limitation.
2. Support to print in bi color and bi filament, promote printing efficiency sharply.
3. Build in HD camera, monitor printing status in long distance, check printing process real time.
4. Flexible and removable build plate, easy to remove precise model, much larger and bendable build plate.
5. Filament testing, stop printing automatically when testing abnormal filament feeding, ensure printing success rate.
6. 3D Cloud, an online platform, achieving Cloud management for 3D Printers and the uploading and storage of 3D printing files, providing a massive model database.
- 3D Printer Flashforge Creator 4S. Dual Extruder 400mm*350mm*500mm.
- Creator 4S: 0.4mm Extruder HT x2 + 0.6mm Nozzle Assembly HS x2 + Spring sheet x1
- Creator 4A: 0.4mm Extruder HT Already installed. Extruder HT Printing for Engineering Filament: PC / PA / PP / PETG / ASA / ABS / PLA / PC-ABS / PAHT
- Printing speed 200mm/s diameter 1.75mm printing temperature 320°C Extruder HS Printing for Carbon Fiber Composite: PACF / PET CF / PP CF / PA GF / PC ABS / PP GF / PPS CF / PPS
- Printing speed 150mm/s diameter 1.75mm printing temperature 360°C
₹1,504,700.00 (excl. GST)Flashforge Creator 4 3D Printer
₹1,504,700.00 (excl. GST)