-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
Laser sensor Module 650nm 6mm 5V 5mW Red Laser
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36â—¦C ~ 65â—¦C.
₹39.00 (excl. GST)Laser sensor Module 650nm 6mm 5V 5mW Red Laser
₹39.00 (excl. GST) -
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
- PCB Size: 60 x 20 x 13.5 (LxWxH)mm.
- Color: red, yellow, green
- LED Size: 10mm x 7.
- Brightness: Normal brightness.
- Voltage: 5V.
- Interface: common cathode red yellow green control.
₹38.00 (excl. GST) -
0.1MM Copper Soldering Solder PPA Enamelled Repair Reel Wire
Specifications and Features:
- Wire Diameter: 0.1 mm.
- Length: about 15m
- Color: Copper
- Flux Content:about 15m
- Material: Copper / Copper Alloy
- Spool Size: 3.1cm x 3.1cm x 1.9cm.
- 100% Brand new and high quality!
- 1 roll of 0.1 mm Enamelled wire.
- It can be used to connect Fly line(Jump wire) for computer and mobile phone motherboard repair.
- No need to remove the lacquer, welding directly.
₹38.00₹44.00(excl. GST)0.1MM Copper Soldering Solder PPA Enamelled Repair Reel Wire
₹38.00₹44.00(excl. GST) -
Solderless 400 pin breadboard – Normal Quality – Without Packing
Specifications and features:
- 400 tie points
- 1 Double strip, Total 300 tie points
- 2 Power lanes, Total 100 tie points in power lanes
- Perfect for Arduino shield prototyping and testing
- Plastic housing, metal contact clips
₹38.00₹58.00(excl. GST)Solderless 400 pin breadboard – Normal Quality – Without Packing
₹38.00₹58.00(excl. GST) -
XT90 Female Connector with Housing (1pcs)
Features:
- Plug Type: 5mm gold bullet connector in nylon shroud
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
₹38.00 (excl. GST)XT90 Female Connector with Housing (1pcs)
₹38.00 (excl. GST) -
LM393 Sound Sensor Detection Module
- Working voltage: DC 3.3-5V.
- IC Chip: LM393
- Signal output indication.
- The output is digital.
- Single channel signal output.
- With the retaining bolt hole, convenient installation.
- Output low level and the signal light when there is sound.
₹38.00₹45.00(excl. GST)LM393 Sound Sensor Detection Module
₹38.00₹45.00(excl. GST) -
Heartbeat Measuring Sensor Module
- Use IR LED and an optical transistor to detect pulsation in fingers
- Small and Compact module
- Easy to use.
₹38.00 (excl. GST)Heartbeat Measuring Sensor Module
₹38.00 (excl. GST) -
White Type C cable – 1m for Arduino Nano V3.0
Features:
- Allows you to connect Arduino NanoV3.0 with USB port to the computer.
- Good data transfer rate.
₹37.62 (excl. GST)White Type C cable – 1m for Arduino Nano V3.0
₹37.62 (excl. GST) -
DC Male Power Jack, Adapter Connector Plug For CCTV, Camera -(2.1 x 5.5mm)Pack of 2
DC Male Power Jack
Specifications:
- 2.1 x 5.5mm CCTV Camera DC Power Plug Connector.
- DC Power Plug with plastic construction and strain relief.
- This 2.1 x 5.5mm Power Plug features one power connector end DC plug male to another end terminal for CCTV camera connected.
- The internal diameter of the plug: 2.1mm
- The external diameter of the plug: 5.5mm
₹36.00 (excl. GST) -
3K3 10W Resistor 5% – (Pack of 5)
Specification
- Tolerance – 5%
- Power Rating – 3 W
- Resistance – 1 Ohm / 1R
- Resistor Type: Wire Wound
₹36.00 (excl. GST)3K3 10W Resistor 5% – (Pack of 5)
₹36.00 (excl. GST) -
23 Teeth Straight Bevel Plastic Gear ID 6mm Round
Applications of bevel gears are as follows:
- They are used in differential drives, which can transmit power to two axles spinning at different speeds, as as those on a cornering automobile
- Bevel gears are used as the main mechanism for hand drills. The bevel gears have added an advantage of increasing the speed of rotation of the chuck and this makes it possible to drill a range of materials.
- Standard bevel gears are mainly used in low speed applications.
Features:
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
₹36.00 (excl. GST)23 Teeth Straight Bevel Plastic Gear ID 6mm Round
₹36.00 (excl. GST) -
XT90 Male Connector with Housing (1pc)
Specifications and Features:
- Metal connector size: 4.5mm
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
₹36.00 (excl. GST)XT90 Male Connector with Housing (1pc)
₹36.00 (excl. GST)
