-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST)
-
E88 Pro Drone
E88 Pro Drone
Brand Generic Model Name e88 pro Special Feature AUTO RETURN MOBILE APP CONTROL Age Range (Description) Kid Color black Video Capture Resolution 1080p Effective Still Resolution 8 Connectivity Technology Wi-Fi Included Components Battery Skill Level Beginner ₹1,500.00 (excl. GST)E88 Pro Drone
₹1,500.00 (excl. GST) -
EasyMech Bracket For NEMA 17 Stepper Motor – STRAIGHT
Features :
- Most accurate design for NEMA17 Stepper Motor
- Made from High-Quality MS.
- Equips extra holes for user-defined motor fitting.
₹138.00 (excl. GST)EasyMech Bracket For NEMA 17 Stepper Motor – STRAIGHT
₹138.00 (excl. GST) -
EasyMech Bracket For NEMA23 Stepper Motor – Straight
Features :
- Most accurate design for NEMA23 Stepper Motor
- Made from High-Quality MS.
- Equips extra holes for user-defined motor fitting.
₹170.00 (excl. GST)EasyMech Bracket For NEMA23 Stepper Motor – Straight
₹170.00 (excl. GST) -
₹970.00 (excl. GST)
-
Electret Condensor Microphone(Pack of 5)
An electret microphone is a type of electrostatic capacitor-based microphone, which eliminates the need for a polarizing power supply by using a permanently charged material. Unlike other condenser microphones, electret types require no polarizing voltage, but they normally contain an integrated preamplifier, which does require a small amount of power (often incorrectly called polarizing power or bias). This preamp is frequently phantom powered in sound reinforcement and studio applications. Other types include a 1.5 V battery in the microphone housing, which is often left permanently connected as the current drain is usually very small.
₹65.00 (excl. GST)Electret Condensor Microphone(Pack of 5)
₹65.00 (excl. GST) -
Electric Air Blower
- Air Pressure: 400 Mn
- Air Volume: 2.3 m3/min
- No-Load speed: 13000/min
- Watts: 335
- Weight: 1.8 Kg
₹550.00 (excl. GST)Electric Air Blower
₹550.00 (excl. GST) -
Electric Drilling and Grinding Large Tools Kit (72 pcs) – LX134MO
- Speed Control : 8000-30000 rpm
- Diameter extension : 0.5 to 3.2 mm
- Number of tools including chucks : 75 pcs
- Performance : 130W
- Weight milling : 0.5 kg
- Package weight : 1.8 kg
- Dimensions : 240 mm length
- Power : 230V / 50Hz
₹2,100.00 (excl. GST)Electric Drilling and Grinding Large Tools Kit (72 pcs) – LX134MO
₹2,100.00 (excl. GST) -
Electrolytic Capacitor 10 uF 25V (Pack of 40)
Electrolytic Capacitor
- Capacitance: 10 uF
- Voltage: 25V
- Type: Through-hole electrolytic
- Operating temperature: -40ºC to 125ºC
- Pack of 40 pieces
- Capacitor dimension (each): 4.1 x 8.2 x 32 mm
₹49.00 (excl. GST)Electrolytic Capacitor 10 uF 25V (Pack of 40)
₹49.00 (excl. GST) -
Electrolytic Capacitor Kit – 120pcs 12 value 1uF – 470uF
- Electrolytic Material
- Pieces: 120
- Width x Height: 5 mm x 15 mm
₹95.00 (excl. GST)Electrolytic Capacitor Kit – 120pcs 12 value 1uF – 470uF
₹95.00 (excl. GST) -
Electronics Component Pack Kit
Electronics Component Pack Kit LED ,Switch, Potentiometer, Resistors ,Headers
₹225.00 (excl. GST)Electronics Component Pack Kit
₹225.00 (excl. GST) -
ELM327 OBD2 Bluetooth Interface Auto Car Scanner V1.5
Functions:
- Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
- Clear trouble codes and turn off the MIL (“Check Engine” light)
- Display current sensor data, including:
- Engine RPM
- Calculated Load Value
- Coolant Temperature
- Fuel System Status
- Vehicle Speed
- Short Term Fuel Trim
- Long Term Fuel Trim
- Intake Manifold Pressure
- Timing Advance
- Intake Air Temperature
- Air Flow Rate
- Absolute Throttle Position
- Oxygen sensor voltages/associated short term fuel trims
- Fuel System status
- Fuel Pressure.
Specifications and Features:
1. Works with all OBD-II compliant vehicles.2. Wireless (Bluetooth).3. Software included for Palm, PDA.4. Software included for Windows PC.5. Software included for Windows Smartphone.6. Supports ISO 9141, KWP2000.7. Supports SAE J1850.8. Supports CAN bus.10. Colour: White.₹580.00 (excl. GST)ELM327 OBD2 Bluetooth Interface Auto Car Scanner V1.5
₹580.00 (excl. GST) -
EM-18 RFID Reader module
- Operating Voltage: 5V DC Supply
- Reading Distance: 6-10 cm.
- Read frequency: 125 kHz.
- EM4001 64 – bit RFID tag compatible.
- 9600bps ASCII output.
- Current : <50 mA
- Operating Frequency : 125 Khz
- Read Distance : 5 cm
- Compatible Tags : 125KHz EM4100 Tags
₹200.00 (excl. GST)EM-18 RFID Reader module
₹200.00 (excl. GST)