-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
₹380.00 (excl. GST)DuPont Connector Shell Kit -620pcs 2.54mm
₹380.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
1Hz-50MHz Crystal Oscillator Frequency Counter DIY Kit LED Digital Frequency Tester Meter
- LED display to show the data clearly.
- Measuring Frequency Range: 1Hz~50MHz; Signal Frequency: Max.30V.
- Can measure the oscillation frequency of most commonly used crystals.
- Automatic range conversion without manual switching.
- Programmable addition and subtraction frequency settings, can measure radio transceiver.
- Warranty not applicable for this product
₹390.00 (excl. GST) -
VL53L0X Time Flight (ToF) Laser Ranging Sensor Breakout 940nm GY-VL53L0XV2 Laser Distance Module I2C IIC
- Maximum Sensoring Distance: 2m
- Working Voltage: 2.6V – 5.5V
- Communication mode: serial output, PWM output, the chip itself IIC output.
- Default configuration: serial baud rate 9600, automatic output, high precision mode.
₹390.00 (excl. GST) -
Lcd 128X64 Yellow Backlight Alphanumeric Display for 8051,Avr,Arduino,Raspberry Pi,Pic,Arm All Microcontroller (Green)
- +5V Power Supply
- 1/64 Duty Cycle
- Voltage operating range: – 2.7 to 5.5V
- Liquid crystal display
- Built-in negative voltage
₹390.00 (excl. GST) -
Stanley PLIER Long Nose, 203mm-8
- Features – Forged Steel Construction, Double dipped handles, Rust Resistant Finish
- Specifications – Part No. 84-102, Size: 203mm / 8″ Long Nose Plier
- Applications – Electric and Household applications
₹400.00 (excl. GST)Stanley PLIER Long Nose, 203mm-8
₹400.00 (excl. GST) -
84-096-23 127mm-5 Needle Nose Miniature Plier
- Long tempered jaws for working in hard to reach areas
- Forged steel construction
- Rust resistant finish
- Double dipped handle for comfort | Meets or exceeds ANSI standards
₹400.00 (excl. GST)84-096-23 127mm-5 Needle Nose Miniature Plier
₹400.00 (excl. GST) -
5 in 1 Stainless Steel Tweezer Set
- This craft tweezer set made of high strength stainless steel with, process by heat treatment and hardening to make the tweezers high elasticity
- The tip of the tweezers has a high hardness and can be used for precise operation such as board soldering or watch repair.
- We have a professional team and always ready to provide the best service
₹400.00 (excl. GST)5 in 1 Stainless Steel Tweezer Set
₹400.00 (excl. GST) -
Drill Bit Set Combo HSS-13 Pcs
- Industrial quality for smooth accurate drilling
- Use on plastic, metal and wood
- HSS drill set with standard 1/4″ hex shank that will fit
- cordless screwdrivers, drills etc or use in standard drill chuck.
₹400.00 (excl. GST)Drill Bit Set Combo HSS-13 Pcs
₹400.00 (excl. GST) -
Orange 12V 20 RPM Johnson Geared DC Motor Grade A Quality Encoder Compatible
Features :
- Grade A Quality branded Johnson DC Motor.
- It has sturdy construction.
- Shaft equips metal bushes for long life.
- It comes with High-Quality gears.
- The shaft has a hole for better coupling.
₹400.00 (excl. GST)Orange 12V 20 RPM Johnson Geared DC Motor Grade A Quality Encoder Compatible
₹400.00 (excl. GST) -
ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
Features :
ESP32-CAM :
- The smallest 802.11b/g/n Wi-Fi BT SoC module.
- Low power 32-bit CPU, can also serve the application processor.
- Up to 160MHz clock speed, summary computing power up to 600 DMIPS.
- Built-in 520 KB SRAM, external 4MPSRAM.
- Supports UART/SPI/I2C/PWM/ADC/DAC.
- Support OV2640 and OV7670 cameras, built-in flash lamp.
- Support image WiFI upload.
- Supports TF card.
- Supports multiple sleep modes.
- Embedded Lwip and FreeRTOS.
- Supports STA/AP/STA+AP operation mode.
- Support Smart Config/AirKiss technology.
- Support for serial port local and remote firmware upgrades (FOTA).
Specifications :
- Wireless Module: ESP32-S WiFi 802.11 b/g/n + Bluetooth 4.2 LE module with PCB antenna, u.FL connector, 32Mbit SPI flash, 4MBit PSRAM.
- External Storage: micro SD card slot up to 4GB.
- Camera
- FPC connector.
- Support for OV2640 (sold with a board) or OV7670 cameras.
- Image Format: JPEG( OV2640 support only ), BMP, grayscale.
- LED flashlight.
- Expansion: 16x through-holes with UART, SPI, I2C, PWM.
- Misc: Reset button.
- Power Supply: 5V via pin header.
- Power Consumption.
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
- Dimensions (ESP32): 40 x 27 x 12 (LxWxH) mm.
- Temperature Range: Operating: -20 ℃ ~ 85 ℃; storage: -40 ℃ ~ 90 ℃ @ < 90%RH.
₹400.00 (excl. GST) -
2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit
2 x Gear Motor
4 x “T” mode Fixed Motor Bracket
16 x M3X10mm Screw
8 x M3 Nut
4 x M3X12+6mm Copper Cylinder
4 x M3X30mm two-way Copper Colum₹400.00 (excl. GST)2WD Mini Round Double-Deck Smart Robot Car Chassis DIY Kit
₹400.00 (excl. GST)
