-
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST)
-
470 Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 470 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 470 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹50.00 (excl. GST)470 Ohm Carbon Film Resistor- Pack of 50 pcs
₹50.00 (excl. GST) -
LCD1602 Parallel LCD Display with IIC/I2C interface
- Model:Â LCD1602
- Interface: I2C
- Interface Address: 0x27
- Character Color: White
- Backlight: Blue
- Supply voltage: 5V
- Board Dimensions( L x W x H ) mm: 80 x 36 x 18
₹140.00 (excl. GST)LCD1602 Parallel LCD Display with IIC/I2C interface
₹140.00 (excl. GST) -
650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
- Output Power: 5mW
- Working Voltage: 5V DC
- Working temperature: -10 ℃~＋40 ℃
- Housing material: Copper
- Working life: more than 2000 hours
- Spot mode: Dot Facula (continuous output)
- Laser wavelength: 650nm red-colored.
- Operating current: <40mA
- Power lead length: 120mm.
₹9.50 (excl. GST)650nm 6mm 5V DC 5mW Mini Laser Dot Diode Module
₹9.50 (excl. GST) -
1M ohm Potentiometer vertical preset variable resistor (105) -1 Mega Ohm (Ω) potentiometer
Applications/Uses
- Voltage / Current control circuits
- Volume Control
- Tuning or controlling circuits
- Analog input control knobs
- 1M ohm Potentiometer
₹3.00 (excl. GST) -
2K ohm Metal Variable Resistor Preset – ELCON
- Part No: EP085-2K
- Manufacturer: ELCON
- Value: 2k ohm
- Rotation Angle: 230 Deg
₹5.00 (excl. GST)2K ohm Metal Variable Resistor Preset – ELCON
₹5.00 (excl. GST) -
1K ohm Cermet Preset (Variable Resistance)
- Part No.: 1K ohm Cermet Pot
- Package/Mounting Type : Through Hole
₹7.00 (excl. GST)1K ohm Cermet Preset (Variable Resistance)
₹7.00 (excl. GST) -
RM065-503(50K)-BOCHEN(Chengdu Guosheng Tech)-±25% 100mW 50kΩ Plugin Potentiometers, Variable Resistors ROHS
- MPN: RM065-503(50K)
- Brand: BOCHEN(Chengdu Guosheng Tech)
- MOQ Reel: 500/Bag
- Packaging Type: Bag
₹10.00 (excl. GST) -
10K Preset Potentiometer / Trimmer / Trimpot
- Material used: Metal
- Value: 0-10K
- Colour: Silver
- Type: Pre set
₹6.00 (excl. GST)10K Preset Potentiometer / Trimmer / Trimpot
₹6.00 (excl. GST) -
GBU810-Slkor-175A 1V@4A 8A 1kV GBU Bridge Rectifiers ROHS
- MPN: GBU810
- Brand: Slkor
- MOQ Reel: 500/Full Box
- Packaging Type: Full Box
₹21.00 (excl. GST)GBU810-Slkor-175A 1V@4A 8A 1kV GBU Bridge Rectifiers ROHS
₹21.00 (excl. GST) -
Electrode Probe for Liquid pH Value Detection Sensor Module
- PH range: 0-14 PH
- Temperature range: 0-60℃
- Zero-point: 7 ± 0.5PH
- Alkali Error: 0.2PH
- Theoretical Percentage Slope: ≧98.5%
- Internal Resistance: ≦250MΩ
- Response Time: ≦1min
₹624.00 (excl. GST)Electrode Probe for Liquid pH Value Detection Sensor Module
₹624.00 (excl. GST) -
10k Volumable Pot
- Package include: – 10 K Potentiometer
- Mounting diameter:5mm,
- shaft diameter: 4mm,
- shaft length: 14mm
- value: 10k ohm Ensures matchless performance
₹35.00 (excl. GST)10k Volumable Pot
₹35.00 (excl. GST) -
XKC-Y25 NPN Intelligent Non-Contact Liquid Water Level Sensor
- Input Voltage: DC 5-12V
- Power Consumption: 5mA
- Output Current: 1-200mA
- Communication: NPN
- Material: ABS
- Waterproof Performance: IP67
₹484.00 (excl. GST)XKC-Y25 NPN Intelligent Non-Contact Liquid Water Level Sensor
₹484.00 (excl. GST)
