-
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC: 3.3V-5V
GND: GND
DO: Digital output interface(0 and 1)
AO: Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST)
-
Snap Circuits Jr. SC-100 Kit
- Dr. Toy 100 Best Children’s Products
- Dr Toy Best Educational Products
- Valuable component to a rounded STEM curriculum
- Build working models of a photo sensor
₹3,919.00 (excl. GST)Snap Circuits Jr. SC-100 Kit
₹3,919.00 (excl. GST) -
HX770 Vmax Aircraft 6-AXIS GYRO QUADCOPTER Drone
- HX770 GYRO QUADCOPTER Drone toy Quadcopter Material: ABS, metal Item size: 17*17*4.5 cm Frequency: 2.4G Quadcopter weight(with battery): 33g Flying Height: 30 meters max Controlling distance: 30 meters
- Battery for controller: 4*”AA” batteries(not included) Battery for quadcopter: 3.7V 220mAh Li-poly
- Charging Time: about 30 minutes
- Flying time: about 6-9 minutes For customer satisfaction, each piece is quality tested against any manufacturing defect, Note that it is a delicate product may need practice for best control. Important Note: Only for 14+ age, must be used in Adults Supervision.
- Function: 360-degree flips in all directions, fancy rotation, different speed mode, fantasy light Package Contents: 1 x HX 770 toy Drone 1 x 3.7V 220mAH battery 1 x Transmitter 2 x Propeller 1 x Manual.
- 360° Roll-Over: The simple flying of WSAD is too boring, and the new 3D rolling special effects surprise all the people.
- 6 Channel Stable Remote-Control Quadcopter Drone, Very Fun To Fly And Has A Great Control On The Copter.
₹1,600.00₹1,980.00(excl. GST)HX770 Vmax Aircraft 6-AXIS GYRO QUADCOPTER Drone
₹1,600.00₹1,980.00(excl. GST) -
VEER 360 Altitude hold drone double Battery
- Speed level : Beginner, Moderate and Sports for racing mode.
- 3D Flip Stuns : Get fun with just one click. || Control Mode : Fly with 2.4 GHz Remote.
- One Key Take-Off / Landing : to fly like PRO with safety. || One-Key-Return and Head-Less : So that you don’t worry about losing your Drone.
- Double Battery : Included Double fun with double batteries.
- Package contains :- 1 Drone module, 1 2.4 GHz remote control, 4 safety guards, 2 pcs LiPo battery, 1 charging cable, 1 Instruction manual for operation, 4 Landing Gears, & 1 Screwdriver.
₹5,500.00 (excl. GST)VEER 360 Altitude hold drone double Battery
₹5,500.00 (excl. GST) -
DC 24V Solenoid Cabinet Door Lock
Features:
- Iron Body Material
- High-quality ultra-compact electric lock.
- Rustproof, durable, safe, and convenient to use.
- Suction which tightly sucks the iron, thus locking the door.
- Applicable for being installed in the escape door or fire door electronic controlled system.
- Adopts the principle of electric magnetism, when the current is through the silicon, the electromagnetic lock will achieve a strong.
₹297.00 (excl. GST)DC 24V Solenoid Cabinet Door Lock
₹297.00 (excl. GST) -
150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply
Features :
- The non-isolated step-up power conversion module
- Onboard LED illuminates when the voltage is applied to the module
- Equips Multi-turn Potentiometer.
- Easy to drive 65W 90W dual-core notebook.
- The output voltage is continuously adjustable on OUT+ and OUT- screw terminals (Output voltage must be greater than input voltage)
₹150.00 (excl. GST)150W DC-DC Boost Converter 10-32V to 12-35V 6A Step-Up Adjustable Power Supply
₹150.00 (excl. GST) -
150mm FrSky Receiver Antenna new version IPEX4
Features:
- 2.4G remote control
- Smaller IPEX port
- gold plated head
- precision machining, low loss, and high sensitivity
₹25.20 (excl. GST)150mm FrSky Receiver Antenna new version IPEX4
₹25.20 (excl. GST) -
Full Set DIY 2DOF Robot Arm Manipulator Claw+2pcs Servo Brackets(Not Assembly) Kit
Specifications and Features :
- Aluminum Matte Coat Pan and Tilt for the horizontal surface, unassembled
- Servo bracket used in the shoulders and knees or another joint of humanoid robots, biped robots etc.
- Can plant a camera or IR sensor for Robot.
- Package total weight: 112 gm
- Clamp Claw:
- Weight capacity is about 300 gm objects
- Material: Full aluminum alloy
- Weight: About 64gm
- Maximum angle: 54mm
- Total length: 110mm (paw when closed overall longest length)
- Total width: 94mm (the claws open when the maximum overall width)
- Compatible with our MG995 Servo
₹1,887.60 (excl. GST)Full Set DIY 2DOF Robot Arm Manipulator Claw+2pcs Servo Brackets(Not Assembly) Kit
₹1,887.60 (excl. GST) -
Plastic Landing Gear for Quadcopter
Features :
- Good-Quality Gears
- Provides 200mm ground clearance
- Skid proof gears
- Compatible with Q450 and S500 and another large size frames
₹263.00 (excl. GST)Plastic Landing Gear for Quadcopter
₹263.00 (excl. GST) -
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
Features :
- It uses 2.4GHz global open ISM band, with license-free.
- Transmit power is greater than +20 dBm.
- Support six-channel data reception.
- 2Mbit/s speed makes high-quality VoIP possible
- Multi-frequency points: 125 frequency points meet the needs of multi-point communications and frequency hopping.
- Low cost: integrated with high-speed signal processing parts associated with RF protocol, such as: automatically re-send lost packets and generate acknowledge signal;
- SPI interface facilitates the communication with MCU I/O port.
- Facilitate the development for customers, without development RF part.
- Software programming is fully compatible with NRF24L01 modules.
₹192.00 (excl. GST)2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
₹192.00 (excl. GST) -
Servo Driver Module Shield 16 Channel
Features :
- The I2C input, PWM output control 16 roads, steering gear can 16 roads.
- The steering gear power independent V + input maximum 6 V.
- Logic signals and logical power independent output for 3V to 5 V.
- 40-1000 Hz frequency.
₹525.00 (excl. GST)Servo Driver Module Shield 16 Channel
₹525.00 (excl. GST) -
Yellow 38 Teeth Plastic Spur Gear
Features:
- Good Quality Material
- Light Weight
- Heavy Duty and Long Life
- Good Temperature and Environmental Resistance
₹300.00 (excl. GST)Yellow 38 Teeth Plastic Spur Gear
₹300.00 (excl. GST) -
100A Multirotor ESC Power Distribution Battery Board For Quadcopter
Features :
- Compatible with MK KK flight control installment pitch of holes
- Compatible with MK KK flight control system
- Can connect 1-8 ESC.
- Hole Spacing: 45mm Square and 35mm Square (Compatible with KK 45mm spacing)
₹144.00 (excl. GST)100A Multirotor ESC Power Distribution Battery Board For Quadcopter
₹144.00 (excl. GST)
