-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
RFID 13.56MHz Card (Pack of 5)
Features:
- Contactless transmission of data and supply energy (no battery needed)
- Anticollision
- EEPROM
- 1Kbit, organized in 16 sectors, each district two passwords
- User definable access conditions for each memory block
- Data retention of 10 years.
- Write endurance 100 000 cycles
- Security
- Individual key set per sector (per application) to support multi-application with key hierarchy
- A unique serial number for each device
- Transport key protects access to EEPROM on-chip delivery
₹60.00 (excl. GST)RFID 13.56MHz Card (Pack of 5)
₹60.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
DC 3V – 12V Amphibious Horizontal Micro Pump
- Operating Voltage : 2.5 ~ 6V
- Operating Current : 130 ~ 220mA
- Flow Rate : 80 ~ 120 L/H
- Maximum Lift : 40 ~ 110 mm
- Outlet Outside Diameter: 7.5 mm
- Outlet Inside Diameter: 5 mm
₹60.00 (excl. GST)DC 3V – 12V Amphibious Horizontal Micro Pump
₹60.00 (excl. GST) -
AT89S52-24PU DIP-40 Microcontroller
- Package/Case: DIP-40
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
₹60.00 (excl. GST)AT89S52-24PU DIP-40 Microcontroller
₹60.00 (excl. GST) -
Phototransistor L14G3 (L 14 G 3) Photodiode, Photo Diode, Photo detector
Phototransistor L14G3
Specifications:-
- Mounting Type : Through Hole
- Collector to Emitter Breakdown Voltage : 45V
- Collector to Base Breakdown Voltage : 45V
- Emitter to Base Breakdown Voltage : 5V
- On-State Collector Current : 0.5mA
- Reception Angle : ±10°
- Operating Temperature Range (°C) : -65 to 125
₹59.00 (excl. GST)Phototransistor L14G3 (L 14 G 3) Photodiode, Photo Diode, Photo detector
₹59.00 (excl. GST) -
SN74HC74N-TEXAS INSTRUMENTS-Flip-Flop
  SN74HC74N
- Package/Case: DIP
₹58.00 (excl. GST)SN74HC74N-TEXAS INSTRUMENTS-Flip-Flop
₹58.00 (excl. GST) -
2 Pin JST XH 2.54mm Pitch Plug and Socket with Cable – 10 Pcs.
2 Pin JST XH 2.54mm Pitch
Operating Temperature (°C): -25-85
Flammability Rating: UL94V-0
Cable Length(cm): 30
Allowed Wire Size: 30-26
₹58.00 (excl. GST)2 Pin JST XH 2.54mm Pitch Plug and Socket with Cable – 10 Pcs.
₹58.00 (excl. GST) -
MC1458P Amplifier IC
MC1458P Amplifier IC
This general purpose amplifier MC1458P OP amp is a simple circuit component used for signal amplification. Its typical dual supply voltage is ±9|±12 V, with a minimum of ±5 V and maximum of ±15 V. This op amp has a temperature range of 0 °C to 70 °C. This device uses dual power supplies. It has 2 channels per chip. This device utilizes bipolar technology.
₹57.00 (excl. GST)MC1458P Amplifier IC
₹57.00 (excl. GST) -
170 Tie Point Mini Self-Adhesive Solderless Breadboard (Pack of 2)
Features :
- Use: experimental, testing, robot
- Matching jumper, diameter 0.8mm
- Accepts 20-29 AWG wire sizes.
- Adhesive-backed for permanent mounting.
- Color:Â Green, Yellow, Black.
₹57.00 (excl. GST)170 Tie Point Mini Self-Adhesive Solderless Breadboard (Pack of 2)
₹57.00 (excl. GST) -
Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
Radial Ball Bearing
- Model:Â 625ZZ
- Quality: ABEC-3
- Dimensions: 4.6x16x5 mm
- ID (inner diameter): 4.6mm
- OD (outer diameter): 16mm
- Thickness: 5mm
₹55.00 (excl. GST)Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
₹55.00 (excl. GST) -
Resistor 5 Watt 5 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
Product:5W 220 Ohm,
cement resistorPower:5W
Resistance:5 Ohm
Body material:Cement
Tolerance: +/-5%
Color: White
Body Size (approx. ):0.87 x 0.37 x 0.37inch / 22 x 9.5 x 9.5mm(L * W * H)
Lead length(approx. ):0.8inch/21mm,
Lead diameter(approx. ): 0.026 inch/0.65mmPer Piece,
Weight(approx. ):0.18oz/5g
PACKAGE CONTENT: 5 x Cement Resistors
₹55.00 (excl. GST)Resistor 5 Watt 5 Ohm Resistance Axial Lead Ceramic Cement Power Resistor
₹55.00 (excl. GST) -
TCRT 5000 Dual Channel Line Tracking sensor
Features :
- Designed with the reflected infrared sensor, indicator light.
- Built in a potentiometer for sensitivity control.
- On-board LM393 voltage comparator chip and infrared sensing probe TCRT5000L
- Onboard signal output instructions, the output is the highly effective signal at the same time, the indicator lamp light output signal can be directly and single-chip microcomputer IO connection & middot
- Signal detection sensitivity can adjust
- Reserve all the way more circuits (P3 voltage drawn)
- Using the TCRT5000 infrared reflection sensor
- Output form: digital switch output (0 and 1)
- A fixed bolt hole, convenient installation.
₹55.00 (excl. GST)TCRT 5000 Dual Channel Line Tracking sensor
₹55.00 (excl. GST)
