-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
220K Ohm Carbon Film Resistor 0.25 Watt Tolerance 5% – Pack of 50 pcs
- Resistance Value: 220k Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 330 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistor
₹50.00 (excl. GST)220K Ohm Carbon Film Resistor 0.25 Watt Tolerance 5% – Pack of 50 pcs
₹50.00 (excl. GST) -
3.3 Ohm Carbon Film Resistor- Pack of 50 pcs
- Resistance Value: 3.3 Ohms
- Rated Power: 0.25 Watt (1/4W); Tolerance : +/- 5%
- Carbon Film Resistor – Through Hole; Flame Retardant Coating
- Stiff 24 gauge leads (0.022 inches, 0.55 mm) perfect for solderless plug-in breadboards
- Package Include 10 x 3.3 Ohm (Note: Color of resistor may change, so please contact us if you need specific color resistors
₹25.00 (excl. GST)3.3 Ohm Carbon Film Resistor- Pack of 50 pcs
₹25.00 (excl. GST) -
Mini DIY Walking Robot
Mini DIY Walking Robot
Kit contains:
1.motor
2.Battery
3.Dc clip
₹125.00 (excl. GST)Mini DIY Walking Robot
₹125.00 (excl. GST) -
IRF1404 MOSFET – 40V 202A N-Channel HEXFET Power MOSFET
IRF1404 MOSFET
Number of Channels: 1 Channel
Transistor Polarity: N-Channel
Drain-Source Breakdown Voltage (Vds): 40V
Continuous Drain Current (Id): 202A
Drain-Source Resistance (Rds On): 4mOhms
₹87.00 (excl. GST)IRF1404 MOSFET – 40V 202A N-Channel HEXFET Power MOSFET
₹87.00 (excl. GST) -
TS835 FPV 5.8G Wireless AV Transmitter – 600Mw 48Ch (2-6S)
TS835 FPV 5.8G Wireless AV Transmitter
1 x 48 CH AVTransmitter.1 x Power cable1 x A Removable Antenna₹1,450.00 (excl. GST)TS835 FPV 5.8G Wireless AV Transmitter – 600Mw 48Ch (2-6S)
₹1,450.00 (excl. GST) -
Brass M2.5 Standoff Spacer Hex Screws Nut Kit -120pcs
   Screws Nut Kit
- Material: Brass, Stainless Steel; Thread: M2.5; Thread Pitch: 0.4mm; Female-Male Thread; Length: 6mm+6mm, 10mm+6mm, 15mm+6mm, 20mm+6mm; Female Thread Length: 6mm, 10mm, 15mm, 20mm; Packaging List: 10pcs 6mm+6mm Standoffs; 10pcs 10mm+6mm Standoffs; 10pcs 15mm+6mm Standoffs; 10pcs 20mm+6mm Standoffs; 10pcs 6mm Standoffs; 10pcs 10mm Standoffs; 10pcs 15mm Standoffs; 10pcs 20mm Standoffs; 20pcs M2.5x6mm Screws; 20pcs M2.5x2mm Nuts (Packed in a plastic box)
₹680.00 (excl. GST)Brass M2.5 Standoff Spacer Hex Screws Nut Kit -120pcs
₹680.00 (excl. GST) -
₹1,120.00 (excl. GST)
Quadruped Bionic Smart Robot Dog
₹1,120.00 (excl. GST) -
Anycubic Kobra 2 Neo-3D Printer
Features of Anycubic Kobra 2 Neo :
- Â 5X Faster : 250mms Maximum Print Speed 150mms Recommended Print Speed 2500mm Accelerated Speed
- Â Upgraded Extrusion System : Upgraded extruder power reaches up to 60 watts quickly melts the filament in an enhanced flowability : Dual-geared extrusion structure accurately controls material delivery.
- Â Upgraded Cooling System : With an optimized dissipation design the cooling fan reaches up to 7000 rpm This ensures rapid cooling down of the models and a fast printing experience
- Â Auto-leveling Smart Z-Offset : Brand new upgraded Lev iQ 2 Automatic Leveling System in combination with tailored modular realize smart offset to the Z axis without manual adjustment Z Offset can be customed to cater to various printing needs.
- Â Double Metal Spindles and SG15 Bearing : Your prints will come out smooth and stable. Moreover the improved wear resistance of these moving components means you’ll need to replace them less frequently making your printing process more efficient and cost-effective.
- Â Stable Double Z axis Threaded Rod : The Z axis adopts a double-threaded rod structure lessening the lifting resistance while printing. It flattens the building platform and reduces the printing layers bringing excellent printing results even at a faster speed
- Â Easy Modular Assembly : Modular assembly has never been so easy 5 pieces 10 minutes done
- Â 4-3-inch Colored LCD Touchscreen : The 4-3-inch full-colored and sensitive LCD Touchscreen with comprehensive functions and settings offers a better printing experience.
- Â Magnetic Spring Steel Build Plate : The build plate sheet is scratch-resistant and wear-resistant making it easy to remove your prints after printing. With just a slight bend your prints come off the plate effortlessly.
- Â Filament Run-out Sensor : No worries about filament exhaustion or accidental power loss with the smart sensor. It can automatically detect these issues and pause printing, then resume once the issue has been resolved.
₹13,500.00 (excl. GST)Anycubic Kobra 2 Neo-3D Printer
₹13,500.00 (excl. GST) -
LED Traffic Lights Signal Module / Digital Signal Output Traffic Light Module
- PCB Size: 60 x 20 x 13.5 (LxWxH)mm.
- Color: red, yellow, green
- LED Size: 10mm x 7.
- Brightness: Normal brightness.
- Voltage: 5V.
- Interface: common cathode red yellow green control.
₹38.00 (excl. GST) -
4×3 Matrix Membrane Type Keypad -12 Keys
Specifications of 4×3 Matrix Keypad -12 Keys:-
- Length of cable + connector: 93mm
- 7-pin 0.1″ pitch connector
- Weight: 7.5 grams
- Keypad dimensions: 68.5mm x 76.5mm x 1mm
4×3 Matrix Membrane Keypad Features:-
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- Sticker can peel off for adhesive mounting.
- Used widely in industrial and home electronic equipments, instrument, etc.
- This allows a microcontroller to ‘scan’ the 7 output pins to see which of the 12 buttons is being pressed
₹40.00 (excl. GST)4×3 Matrix Membrane Type Keypad -12 Keys
₹40.00 (excl. GST) -
5 Colors F5 MM LED Kit ORANGE 500PCS
Features:
- Low heat, energy-saving, low power consumption, long service life.
- Perfect for light decorations, LED Matrix, and Display Panel.
- Signal indicator and electronic and electrical experiment, including Arduino projects, etc.
₹294.00 (excl. GST)5 Colors F5 MM LED Kit ORANGE 500PCS
₹294.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST)
