-
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
UNO R3 with USB Cable Compatible with Arduino
- Micro-controller : ATmega328.
- Operating Voltage : 5V.
- Input Voltage (recommended) : 7-12V.
- Digital I/O Pins : 14 (of which 6 provide PWM output).
- Analog Input Pins : 6.
₹540.00₹690.00(excl. GST)UNO R3 with USB Cable Compatible with Arduino
₹540.00₹690.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹390.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
4 Channel 5V Relay Module with Optocoupler
- No. of Channel: 4
- Trigger Voltage: 5VDC
- Triode drive, increasing relay coil
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- Power supply indicator and Control indicator lamp
- Power supply and relay instructions, lit, the disconnect is off;
- The input signal, signal, common Terminal and start conducting;
₹160.00 (excl. GST)4 Channel 5V Relay Module with Optocoupler
₹160.00 (excl. GST)
-
Brass M2.5 Standoff Spacer Hex Screws Nut Kit -120pcs
   Screws Nut Kit
- Material: Brass, Stainless Steel; Thread: M2.5; Thread Pitch: 0.4mm; Female-Male Thread; Length: 6mm+6mm, 10mm+6mm, 15mm+6mm, 20mm+6mm; Female Thread Length: 6mm, 10mm, 15mm, 20mm; Packaging List: 10pcs 6mm+6mm Standoffs; 10pcs 10mm+6mm Standoffs; 10pcs 15mm+6mm Standoffs; 10pcs 20mm+6mm Standoffs; 10pcs 6mm Standoffs; 10pcs 10mm Standoffs; 10pcs 15mm Standoffs; 10pcs 20mm Standoffs; 20pcs M2.5x6mm Screws; 20pcs M2.5x2mm Nuts (Packed in a plastic box)
₹680.00 (excl. GST)Brass M2.5 Standoff Spacer Hex Screws Nut Kit -120pcs
₹680.00 (excl. GST) -
DIP IC Socket Chip Seat Kit-66pcs
DIP IC Socket Chip Seat Kit-66pc
6 pins-DIP IC Sockets QTY:18pcs
8 pins-DIP IC Sockets QTY:12pcs
14 pins-DIP IC Sockets QTY:6pcs
16 pins-DIP IC Sockets QTY:6pcs
18 pins-DIP IC Sockets QTY:6pcs
20 pins-DIP IC Sockets QTY:6pcs
24 pins-DIP IC Sockets QTY:6pcs
28 pins-DIP IC Sockets QTY:6pcs₹230.00 (excl. GST)DIP IC Socket Chip Seat Kit-66pcs
₹230.00 (excl. GST) -
Resistor Kit-560pcs 56 Values
Resistor Kit-560pcs
Specification
Type: Carbon Film Resistor
Material: Carbon Film
Power Rating: 1/4W
Resistance Value: 1R~10MΩ (56 Values)
Resistance Tolerance: 5%
Total Length(Approx.): 60mm/2.36-inch
Package List: 560pcs (10pcs*56 values) x Carbon Film Resistors₹250.00 (excl. GST)Resistor Kit-560pcs 56 Values
₹250.00 (excl. GST) -
High Voltage Ceramic Capacitor Kit-300pcs
- Capacity loss has high stability with temperature and frequency
- Special series connection structure is suitable for high voltage and extremely long-term working reliability
- High current climb rate and suitable for high-current loop non-inductive structure
- Values- 3KV0.1nF,3KV0.22nF, 3KV1nF,3KV2.2nF, 3KV4.7nF, 3KV10nF,2KV0.47nF,2KV0.56nF,2KV0.68nF,2KV1nF,2KV1.5nF,2KV3.3nF, 1KV2.2nF, 1KV10nF,1KV22nF
₹650.00 (excl. GST)High Voltage Ceramic Capacitor Kit-300pcs
₹650.00 (excl. GST) -
DIP Inductor Kit-75pcs
1.Typesof values :15
2.Quantity Per Value : 5
3.Total Box Contains : 75pcs
4.Type : DIPValues
5pcs 2.2uh 8*10
5pcs 4.7uh 8*10
5pcs 10uh 8*10
5pcs 22uh 8*10
5pcs 33uh 8*10
5pcs 47uh 8*10
5pcs 68uh 8*10
5pcs 100uh 8*10
5pcs 220uh 8*10
5pcs 330uh 8*10
5pcs 470uh 8*10
5pcs 680uh 8*10
5pcs 1mh 8*10
5pcs 4.7mh 8*10
5pcs 10mh 8*10₹605.00 (excl. GST)DIP Inductor Kit-75pcs
₹605.00 (excl. GST) -
₹160.00 (excl. GST)Ceramic Capacitor Kit -300pcs (30 Kinds )
₹160.00 (excl. GST) -
₹380.00 (excl. GST)DuPont Connector Shell Kit -620pcs 2.54mm
₹380.00 (excl. GST) -
460pcs 24 Vaules 2P/4P Touch Botton Switch Kit
Item: 460pcs tactile switch push button
Contact Type: momentary contact
Current Rating: 0.1A
Voltage Rating: DC 12V
Contact Resistance:100M Ohm₹750.00 (excl. GST)460pcs 24 Vaules 2P/4P Touch Botton Switch Kit
₹750.00 (excl. GST) -
200pcs 10 Values Transistor Kit
Specifications: Material: Silicon
Package: TO-92
Application: Amplification
Type and Qty:
BC327
20pcs
BC337
20pcs
BC517
20pcs
BC547
20pcs
BC548
20pcs
BC549
20pcs
BC550
20pcs
BC556
20pcs
BC557
20pcs
BC558
20pcsPackage Includes: 1 Box x Transistors
₹300.00 (excl. GST)200pcs 10 Values Transistor Kit
₹300.00 (excl. GST) -
500pcs 24 Values Aluminum Electrolytic Capacitor Kit
Allowable deviation:±20%
Installation method:DIP
Product appearance:Cylindrical
Material:Metal
Dielectric material:aluminum electrolysis
Power characteristics:medium power high frequency
Weight:295g₹650.00 (excl. GST)500pcs 24 Values Aluminum Electrolytic Capacitor Kit
₹650.00 (excl. GST) -
₹370.00 (excl. GST)Zener Diode Kit 300pcs 30 Values 0.5W 2V0-39V
₹370.00 (excl. GST) -
100pcs RM065 Blue and White Adjustable Resistor Kit
Brush: Copper
Resistor: Bakelite board
Mid-foot: Iron material, surface polished tin treatment
Eyes: iron material, surface polished tin treatment
Curved legs: iron material, surface polished tin treatment
Plastic cover: plastic POM, color is white
Plastic frame: plastic PBT, color is blue
₹350.00 (excl. GST)100pcs RM065 Blue and White Adjustable Resistor Kit
₹350.00 (excl. GST)
