-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
- “4A DC-DC Step-down Adjustable Constant Voltage Module” already exists in your wishlist
-
XKC-Y25 NPN Intelligent Non-Contact Liquid Water Level Sensor
- Input Voltage: DC 5-12V
- Power Consumption: 5mA
- Output Current: 1-200mA
- Communication: NPN
- Material: ABS
- Waterproof Performance: IP67
₹572.00 (excl. GST)XKC-Y25 NPN Intelligent Non-Contact Liquid Water Level Sensor
₹572.00 (excl. GST) -
Official Raspberry Pi 5 Camera FPC Cable – 200mm
- FPC Cable Type:Â Camera Cable
- Length: 200 mm
₹99.00 (excl. GST)Official Raspberry Pi 5 Camera FPC Cable – 200mm
₹99.00 (excl. GST) -
EBYTE E32-900T30D SEMTECH’s LoRa solution Wireless Serial Port Transmitter LoRa Modulation 30dBm 868/915MHz 1W CDEBYTE Antenna DIP 8km
- Model No.:E32-900T30D
- Port Number:1
- Interface Type: CDMA
- Working Frequency Range:862 to 915Â MHz
- Operating Distance Range (Meter):8000
₹1,193.00 (excl. GST) -
Anti-Corrosion Water Level Sensor with Ball Float Switch
- Rating contract (Max.): 10 W
- Switching power supply (Max.): 110VDC
- Resistance contract (Max.): 100 Ω
- Appro. Float Ball Size (mm) : 24×17 (LxD)
- Body Total Length (mm) : 85
- Cable Length (cm) : 37
- Total Float opening: 70°
- Switch ON/OFF angle Approx. betn 15° to 20°
₹108.00 (excl. GST)Anti-Corrosion Water Level Sensor with Ball Float Switch
₹108.00 (excl. GST) -
Raspberry Pi Zero 2 W
- BCM2710A1 die Cortex-A53 CPU
- 512MB LPDDR2 DRAM
- 802.11b/g/n wireless LAN
- Bluetooth 4.2 / Bluetooth Low Energy (BLE)
- Â MicroSD card slot
- Â Mini HDMI and USB 2.0 OTG ports
- Micro USB power
₹1,630.00 (excl. GST)Raspberry Pi Zero 2 W
₹1,630.00 (excl. GST) -
GT2 Timing Belt 400mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
- Pitch: 2mm
- Material: Neoprene Rubber With Fiberglass Core
- Width: 6mm
- Total Length: 400mm
- Belt Height: 1.52 mm
- Tooth Height: 0.76mm
- Shape: Closed Loop
₹88.00 (excl. GST)GT2 Timing Belt 400mm Width-6mm Closed-Loop Rubber Belt for 3D Printer
₹88.00 (excl. GST) -
50kg Half-bridge Experiments Body Scale Load Cell Sensor
- Capacity (Kg): 50.
- Output Sensitivity (mv/v): 1.0±0.1.
- Nonlinearity (%FS): 0.03.
- Repeatability (%FS): 0.03.
- Input Resistance (Ω): 1000.
- Insulation Resistance (MΩ): ≥5000.
₹33.00 (excl. GST)50kg Half-bridge Experiments Body Scale Load Cell Sensor
₹33.00 (excl. GST) -
Universal Heat Sink (25 x 25 x 10 mm)
- Quantity of blade: 8
- Material: Aluminum
- Color: Black
- Blade thickness: 1mm
- Base plate thickness: 2mm
- Dimensions: 25 x 25 x 10 mm
₹11.00 (excl. GST)Universal Heat Sink (25 x 25 x 10 mm)
₹11.00 (excl. GST) -
400KV Step Up Power Module
Input Voltage: DC3.6V-6V
Input Current: 2A-5A
Output Voltage: DC 400KV (Please pay attention to safety when used)
Input Line Length: about 100mm (red is positive)
Output Line Length: about 160mm₹103.00 (excl. GST)400KV Step Up Power Module
₹103.00 (excl. GST) -
Songle Single-channel 5V 30A Relay Module Power Failure Relay
- Trigger Voltage: 5VDC
- Switching Voltage: 250VAC@30A; 30VDC@30A
- The module can be set high level or low-level trigger by the jumper
₹148.00 (excl. GST)Songle Single-channel 5V 30A Relay Module Power Failure Relay
₹148.00 (excl. GST) -
XKC-Y26-V Non-contact Water Liquid Level Induction Switch Detector Sensor 5-24V
- Product model: XKC-Y26-V
- Input voltage (Vin): DC 5~12V
- Output Signal: High and Low Level
- Material: ABS
- Waterproof performance: IP65
₹792.00 (excl. GST)XKC-Y26-V Non-contact Water Liquid Level Induction Switch Detector Sensor 5-24V
₹792.00 (excl. GST) -
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
₹144.00 (excl. GST)
