-
Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
Wiring Connection
VCC:Â 3.3V-5V
GND:Â GND
DO:Â Digital output interface(0 and 1)
AO:Â Analog output interfaceFeatures :
- Dual output mode, analog output more accurate
- A fixed bolt hole for easy installation
- With power indicator (red) and digital switching output indicator (green)
- Having LM393 comparator chip, stable.
₹690.00 (excl. GST)Soil Moisture Sensor Module Wholesale/B2B (Pack of 25)
₹690.00 (excl. GST) -
Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹750.00 (excl. GST)Capacitive Soil Sensor V2.0 Wholesale/B2B (Pack of 25)
₹750.00 (excl. GST) -
Waveshare 7inch Capacitive Touch Screen LCD (B)
Features:Â
- 800×480 High-Resolution Display
- Capacitive Touch Control
- HDMI Interface for Display, USB Interface for Touch Control
- Supports Raspberry Pi, comes with Raspbian driver (Works directly with Raspbian), and Ubuntu Image
- Supports Banan Pi, Banana Pro, comes with LUbuntu, Raspbian Image
- Supports BB Black, comes with Angstrom Image
- Not only SBC’s, but it can also work with any computer display with HDMI Interface, Touch interface will not work in that case.
- Backlight control, for lower power consumption.
₹4,200.00₹4,600.00(excl. GST)Waveshare 7inch Capacitive Touch Screen LCD (B)
₹4,200.00₹4,600.00(excl. GST) -
Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
- Robotics Kit Arduino based Do it Yourself Type Kit
- Explorer Board- UNO compatible microcontroller board with integrated motor controllers, RGB LED, and breadboard
- Power Supply Module- To be used with 18650 Li-Ion batteries with on-board charge and usage switches
- Acrylic Chassis- Consists of two layers for mounting the electronics and serves as the chassis of the robot. Also contains 4 nylon spacers for connecting the top and bottom layers.
- Micro Metal gear motors- Two motors used for robot mobility. Wheels & Tyres- Plastic wheels with silicone tyres for great traction.
- Line Following Array- Line following sensor consisting of 5 individual sensors to help in projects such as line following. Ultrasonic Sensor- Adds distance sensing capability to your project.
₹3,450.00₹4,500.00(excl. GST)Explorer Kit for Robotics and DIY Prototyping Compatible with Arduino IDE
₹3,450.00₹4,500.00(excl. GST) -
LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
- Operating Voltage (VDC) 3.3
- Digital I/O Pins 26
- Analog I/O Pins 12
- Clock Speed 240 MHz
- Flash Memory 4 MB
₹405.00 (excl. GST)LOLIN32 V1.0.0 based on ESP32 Rev1 Wifi Bluetooth Board
₹405.00 (excl. GST) -
Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
- Voltage: 12V to 24V; Max Current: 25A
- Can work stably when the current is not more than 25A
- Maximum power of the heated bed: Over 300W (12V) or 600W (24V) Make sure that the cables that connect to the controller board and hotbed can withstand high current
₹200.00 (excl. GST)Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer
₹200.00 (excl. GST) -
Capacitive Soil Sensor V2.0
- Operating Voltage: 3.3 ~ 5.5 VDC.
- Operating Current: 5mA.
- Interface: PH2.54-3P.
- Supports 3-Pin Gravity Sensor interface
- Intelligent agriculture
₹60.00 (excl. GST)Capacitive Soil Sensor V2.0
₹60.00 (excl. GST) -
ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
- This DHT11 temperature and humidity sensor shield is specially designed for ESP8266 ESP-01 ESP-01S development board.
- On-board 8pin socket enable you plug the wifi transceiver to the board directly perfect for DIY your wireless temperature/humidity webserver system.
- Working Voltage: DC 3.7 – 12V
- The weight of about 10 grams
- Package Included: 1 X DHT11 Humidity Temperature Sensor
₹130.00 (excl. GST)ESP8266 ESP-01/ESP-01S – DHT11 Temperature Humidity Sensor Module
₹130.00 (excl. GST) -
Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
- TDA7297 power amplifier board, connecting terminals all adopt XH2.54 needle seat, quick installation
- 2.0 dual channel 15W+15W output, can be connected to 4-8 Euro 10-50W speakers, wide range of applications
- Voltage: DC 9-15V, recommended DC voltage 12V, current 2A or more
- Power: 15W+15W
- Impedance: 4-8 ohms
₹215.00 (excl. GST)Dual Channel TDA7297 Amplifier Board AC/DC 12V Module
₹215.00 (excl. GST) -
NE555 Frequency Adjustable Pulse Generator Module
- Single channel signal output, the output duty cycle about 50% square wave.
- Plate load resistor, adjust the resistance to control the output frequency.
- Onboard power indicator.
- Working voltage: 5V~12V.
- Onboard NE555 IC.
₹35.00 (excl. GST)NE555 Frequency Adjustable Pulse Generator Module
₹35.00 (excl. GST)
-
1 Channel Relay Module, 30A with Optocoupler, Isolation 12V Supports, High and Low Triger
- Channel: 1 channel
- Relay Voltage: 12V
- High impedance controller pin
- Pull-down circuit for the avoidance of malfunction
- One normally closed contact and one normally open contact
- Triode drive, increasing relay coil
₹144.00 (excl. GST) -
KCX BT003 Bluetooth 4.2 Stereo Audio Receiver Wireless Module
- Operating Voltage: 3.3-5VDC
- Operating Current: 35mA
- Bluetooth Version: 4.2
- Stereo Channel Output
₹330.00 (excl. GST)KCX BT003 Bluetooth 4.2 Stereo Audio Receiver Wireless Module
₹330.00 (excl. GST) -
Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
- Bidirectional control for two brushed DC motor.
- Control one unipolar/bipolar stepper motor.
- Operating Voltage: DC 4V to 16V
- Maximum Motor Current: 3A continuous, 5A peak
- Buck-boost regulator to produce 5V output (200mA max).
- Buttons for quick testing.
₹718.00 (excl. GST)Cytron 3Amp 4V-16V Dual Channel DC Motor Driver MDD3A
₹718.00 (excl. GST) -
80mm-A Mecanum Wheel Compatible with 6.7mm Coupling (Pack of 4)-Yellow
- Color: Yellow
- Weight: 44g (each)
- Inner diameter: 3.3mm
- Outer wheel diameter: 60mm
- Thickness: 37mm
- Captive Screw Diam
₹679.00 (excl. GST)80mm-A Mecanum Wheel Compatible with 6.7mm Coupling (Pack of 4)-Yellow
₹679.00 (excl. GST) -
6 Flexible Arms Soldering Station With Swiveling Alligator Clip
- Total Weight: 400 gm
- Each Arm length: 34 cm
- Alligator clip(L): 44mm (large size)
- Alligator clips maximum thickness limit: 6mm
- Built-in Trays for components and screws.
- 6 flexible arms each with a large swiveling alligator clip.
- 6+1 pockets in beautifully base to hold loose components.
- 6 Silicon clip tips for the ultimate heat resistance.
₹1,502.00 (excl. GST)6 Flexible Arms Soldering Station With Swiveling Alligator Clip
₹1,502.00 (excl. GST) -
6000ZZ Bearing 10x26x8 Stainless Steel Bearings (4Pcs)
- Model:Â 6000ZZ
- Inside diameter: 10 mm
- Outside diameter: 26 mm
- Width: 8 mm
- Weight: 70 gm. (Each has 17 gm)
₹154.00 (excl. GST)6000ZZ Bearing 10x26x8 Stainless Steel Bearings (4Pcs)
₹154.00 (excl. GST) -
DC5V Humidifier USB Spray Module DIY Incubation Experiment Equipm 108KHz
- Work Voltage:DC 4.5V~5.0V
- Work Power:2W
- Work Frequency:108KHz(+/-3KHz)
- Come with a driver
- Power-ON trigger work
- 108KHz high frequency oscillator
₹216.00 (excl. GST)DC5V Humidifier USB Spray Module DIY Incubation Experiment Equipm 108KHz
₹216.00 (excl. GST) - Work Voltage:DC 4.5V~5.0V
-
Pro-Range 12V 60 RPM Johnson Geared DC Motor – Grade A Quality-Encoder Compatible
- Base Motor RPM: 18000
- Operating Voltage: 6-18 V
- Rated Voltage: 12 V
- Rated Torque: 157.6 N-cm
- Stall Torque: 850 N-cm
- Gearbox Dimensions: 29×37 (LxW) mm
₹435.00 (excl. GST) -
Pro-Range INR 18650 11.1V 2000mAh 3C 3S1P Li-Ion Battery Pack with DC Jack Male & Female
- Nominal Capacity (mAh): 2000
- Nominal Voltage (v): 11.1
- Max Charging Voltage (v): 12.6
- Charge Port: DC Female
- Discharge Port: DC Male
₹840.00 (excl. GST) -
₹1,246.00 (excl. GST)
Orange 7.4V 2200mAh 30C 2S Lithium Polymer Battery Pack
₹1,246.00 (excl. GST) -
HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
- Output Sensitivity: 1.0 ± 0.1 mV / V.
- Two selectable differential input channels.
- On-chip active low noise PGA with the selectable gain of 32, 64 and 128.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution:Â 24 bit.
₹43.00 (excl. GST)HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
₹43.00 (excl. GST) -
Official Raspberry Pi M.2 HAT+
- Fast Data Transfer:Â Achieve speeds of up to 450 Mbytes/s with the 4 Gbits/s PCIe 2.0 interface for NVMe SSDs and PCIe accessories.
- Seamless Compatibility:Â Fully compliant with HAT+ specification for easy integration with Raspberry Pi 5.
- Plug-and-Play:Â Automatically detected by the latest Raspberry Pi software and firmware.
- Easy Installation:Â Comes with a 16mm stacking header, spacers, and screws for convenient setup with the Active Cooler in place.
₹978.00 (excl. GST)Official Raspberry Pi M.2 HAT+
₹978.00 (excl. GST)
