-
VL53L0X TOF Based LIDAR Laser Distance Sensor
Applications
- Obstacle detection in robotics.
- Hand detection in hand driers, soap dispensers, faucets, etc.
- Gesture recognition in one dimension.
- Widely used in-camera autofocus to enhance the camera performance in low light or fast-moving objects conditions.
- Used as a proximity sensor in many phones.
₹375.00 (excl. GST)VL53L0X TOF Based LIDAR Laser Distance Sensor
₹375.00 (excl. GST) -
Waterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
₹255.00 (excl. GST) -
Waveshare 12-bit I2C 16-Channel Servo Driver for micro:bit
- Power supply: 5V (POWER connector)Â ORÂ 6V~12V (VIN terminal)
- Servo voltage: 5V
- Logic voltage: 3.3V
- Driver: PCA9685
- Control interface: I2C
- Dimension: 65mm x 36mm
- Mounting hole size: 3.0mm
₹1,040.00 (excl. GST)Waveshare 12-bit I2C 16-Channel Servo Driver for micro:bit
₹1,040.00 (excl. GST) -
Waveshare 320×240 Resistive Touch LCD Display (2.8 Inch)
Features:
- Onboard touch controller, smoother touch experience than solutions that directly use AD pins for touching.
- SPI interface requires a few pins.
- Programmable backlight control, power saving.
- Comes with development resources and a manual (examples for STM32/AVR/PIC).
₹1,220.00 (excl. GST)Waveshare 320×240 Resistive Touch LCD Display (2.8 Inch)
₹1,220.00 (excl. GST) -
Waveshare 4 Inch Resistive HDMI LCD Display 480×800
Features:
- 4inch IPS screen, 480×800 hardware resolution.
- Resistive touch control.
- Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 Model B or Pi Zero, which requires an HDMI cable).
- Drivers provided (works with your own Raspbian/Ubuntu/Kali/Retropie).
- Also works as a computer monitor, in this case, the touch panel is unavailable and an HDMI cable is required.
- HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os).
- 3.5mm audio jack, supports HDMI audio output.
- The backlight can be turned off to lower power consumption.
₹2,490.00 (excl. GST)Waveshare 4 Inch Resistive HDMI LCD Display 480×800
₹2,490.00 (excl. GST) -
Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
Load Cell Sensor 1Kg
- Weighing Range: 0 ~ 1 kg.
- Rated Output: 1.0 ± 0.1mV / V.
- Non Linear Output: ± 0.03% F.S.
- Input Impedance: 1066 ± 10% Ω.
- Output Impedance: 1000 ± 10% Ω.
- Insulation Resistance: 2000 MΩ.
₹116.00 (excl. GST)Weighing Load Cell Sensor 1Kg for Electronic Kitchen Scale YZC-131 With Wires
₹116.00 (excl. GST) -
Weighing Load Cell Sensor 20kg
- Rated Load: 20Kg
- Rated Output: 1.0 ±0.15mV/V
- Zero Output: ±0.1mV/V
- Cree: 0.03%F.S./30min
- Input End: Red+, Black-
- Output End: Green+, White-
- Input Impedance: 1115±10% Ω
₹90.00 (excl. GST)Weighing Load Cell Sensor 20kg
₹90.00 (excl. GST) -
Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
Wheatstone bridge formation of Load Cell:
HX711 (24 bit Analog to Digital Converter)
HX 711 is a precision 24-bit analog to digital converter (ADC) specially designed for Weigh scales and industrial control applications to interface directly with a bridge sensor.
Simply connect Load cell wires to the HX711 module based on their color, then connect DAT (Data) pin to Arduino Analog pin A1 and connect CLK (Clock) pin to Arduin0 Analog pin A0, Put Vcc and GND supply from Arduino power source pins.
₹222.00 (excl. GST)Weighing Load Cell Sensor 3KG For Electronic Kitchen Scale YZC-131 With Wires
₹222.00 (excl. GST) -
White Reed Switch Y213 2*14mm Normal Open
Features :
- Small Module.
- Very easy to use.
- Direct connection in the circuit.
₹16.79 (excl. GST)White Reed Switch Y213 2*14mm Normal Open
₹16.79 (excl. GST) -
XKC-Y26-V Non-contact Water Liquid Level Induction Switch Detector Sensor 5-24V
- Product model: XKC-Y26-V
- Input voltage (Vin): DC 5~12V
- Output Signal: High and Low Level
- Material: ABS
- Waterproof performance: IP65
₹792.00 (excl. GST)XKC-Y26-V Non-contact Water Liquid Level Induction Switch Detector Sensor 5-24V
₹792.00 (excl. GST) -
XL4016E1 200W Step Down Power Supply Module
XL4016E1
- Input voltage: 4-40VDC,
- Output voltage: (1.25-36V) continuously adjustable (recommended load debugging).
- Efficiency: 94%
- Output current: 8A(max)
- Output Power: 200W (max)
₹160.00 (excl. GST)XL4016E1 200W Step Down Power Supply Module
₹160.00 (excl. GST) -
XT90 Female Connector with Housing (1pcs)
Features:
- Plug Type: 5mm gold bullet connector in nylon shroud
- Housing shape provides protection against shorting and reverse polarity
- Can accept up to 8AWG wires
- Semicircular solder terminals make it easy to install wires
- Able to sustain 90A+ continuous current
₹38.00 (excl. GST)XT90 Female Connector with Housing (1pcs)
₹38.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
