-
Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
It’s needed for most types of RepRap 3D printers. Our bearings come pre-lubricated from the manufacturer so that no additional lubrication is required to be applied. These protect the bearing from dust or any possible corrosion.
The SKF Premium quality, Versatile, and robust Deep Groove Ball Bearings are the most common bearing type found in a wide variety of applications. ZZ is equal to double metal shields one metal shield mounted on each side of the bearings and the bearings are lubricated for ensuring longer life.
₹110.00 (excl. GST)Radial Ball Bearing 625ZZ for 3D Printer/ Robot – 4Pcs
₹110.00 (excl. GST) -
Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone
Features:
- Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury
- Throttle range calibrated function: to adapt the throttle differences between different strokes, improve the linearity of throttle response
- programmed project (available throttle stick or card LED parameter settings):
- Brake setting: No brake / with brake
- Battery Type: Lithium battery / NiMH
- Low Voltage Protection Mode: Soft Shutdown / hard off
- Low Voltage Protection Threshold: low / medium / high
- start mode: Normal / Soft / Super-soft and start
- Timing: low / medium / high
- Restore factory defaults
- Comprehensive protection features:
- Under-voltage protection: the program set by the user when the battery voltage is below the protection threshold, ESC automatically reduces the output power
- Overvoltage Protection: input voltage exceeds the input range are not allowed to start, automatic protection, also issued a hasty “beep” Warning
- Overheat protection: built-in temperature detection circuit that automatically reduces the output power ESC temperature is too high
- Remote signal loss protection: remote control signal is lost for 1 second to reduce the power, and then have two seconds to turn off without the remote control signal output
₹1,866.00 (excl. GST)Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone
₹1,866.00 (excl. GST) -
Resistor Kit-560pcs 56 Values
Resistor Kit-560pcs
Specification
Type: Carbon Film Resistor
Material: Carbon Film
Power Rating: 1/4W
Resistance Value: 1R~10MΩ (56 Values)
Resistance Tolerance: 5%
Total Length(Approx.): 60mm/2.36-inch
Package List: 560pcs (10pcs*56 values) x Carbon Film Resistors₹250.00 (excl. GST)Resistor Kit-560pcs 56 Values
₹250.00 (excl. GST) -
Ring/Strip Magnet Experiment Kit (Large K-1 Teaching Kit)
Magnet Experiment Kit
Suitable for use by children aged 6-14years (children should be supervised by an adult).
₹550.00 (excl. GST)Ring/Strip Magnet Experiment Kit (Large K-1 Teaching Kit)
₹550.00 (excl. GST) -
Robotics & AI Kit
Robotics & AI Kit
- Expansion Board – 1
- Microcontroller Board/ Microprocessor Board – 1
- Ultrasonic Sensor – 2
- Potentiometer Module – 4
- Light Sensor – 4
- Servo Motor – 6
- Magnetic Sensor – 1
- LED Module – 4
- Flame Sensor – 1
- Push To Lock Switch Module – 4
- IR Sensor – 1
- DC Motor – 4
- Microcontroller Board/ Microprocessor Board – 1
- Soil Moisture Sensor – 1
- Push Button Switch Module – 4
- Seven Segment Display – 1
- Temperature Sensor – 1
- Buzzer Module – 1
₹11,823.00 (excl. GST)Robotics & AI Kit
₹11,823.00 (excl. GST) -
₹150.00 (excl. GST)
Rubber Band Powered Aircraft Model Kits Toy
₹150.00 (excl. GST) -
SeeedStudio Grove GSR sensor
SeeedStudio
Features:
- Detects conductance of the skin
- Finger Straps for electrodes
₹840.00 (excl. GST)SeeedStudio Grove GSR sensor
₹840.00 (excl. GST) -
₹958.00 (excl. GST)SeeedStudio Seeeduino Xiao SAMD21 (Pre-Soldered)
₹958.00 (excl. GST) -
Sensor Shield V5 Expansion Board For Arduino
- Retain the merits of the V4.0 version
- Laminated design
- PCB immersion gold processing technology
- IIC interface
- Bluetooth module communication interface
- SD card module communication interface
- APC220 wireless rf modules communication interface
- RB URF v1.1 ultrasonic sensors interface
- 12864 LCD string of line and parallel interface
- 32 servo controller interface
₹65.00₹75.00(excl. GST)Sensor Shield V5 Expansion Board For Arduino
₹65.00₹75.00(excl. GST) -
Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for Timing Pulley of 3D Printers
Timing Pulley
Set of 1 ALLEN KEY and 10 GRUB Screw M3*4 Set for 3D Printers
₹11.00 (excl. GST) -
Set of 1 ALLEN KEY and 10 GRUB Screw M4*5 Set for Timing Pulley of 3D Printers
Timing Pulley
- Material: Steel
- Length of Allen Key: 48 mm
- Width of Allen Key: 1.4 mm
- Inner Diameter of grub: 2 mm
- Outer Diameter of Grub: 3.8 mm
₹12.00 (excl. GST) -
Set of M5 X 65 MM Socket Head Cap (Allen) Bolt and Nut-12 pcs
M5 X 65 MM
- Bolt Head Outer Diameter: 8.5 mm
- Bolt Length: 65 mm
- Bolt Head Style: Round
- Bolt Drive Style: Hex Socket
- Color: Black
- Nut Type: Hex
- Nut Outer Diameter: 8 mm
- Allen Key size Required: 4 mm.
- Hardness is 2 times higher than copper,10 times higher than aluminum.
₹335.00 (excl. GST)Set of M5 X 65 MM Socket Head Cap (Allen) Bolt and Nut-12 pcs
₹335.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
