Readytosky 80A ESC 2-6S Brushless ESC Speed Controller for RC Drone

1,866.00

Features:

  1. Security power function: When the power is turned on, regardless of the throttle stick at any position will not start the motor immediately to prevent personal injury
  2. Throttle range calibrated function: to adapt the throttle differences between different strokes, improve the linearity of throttle response
  3. programmed project (available throttle stick or card LED parameter settings):
    1. Brake setting: No brake / with brake
    2. Battery Type: Lithium battery / NiMH
    3. Low Voltage Protection Mode: Soft Shutdown / hard off
    4. Low Voltage Protection Threshold: low / medium / high
    5. start mode: Normal / Soft / Super-soft and start
    6. Timing: low / medium / high
    7. Restore factory defaults
  4. Comprehensive protection features:
    1. Under-voltage protection: the program set by the user when the battery voltage is below the protection threshold, ESC automatically reduces the output power
    2. Overvoltage Protection: input voltage exceeds the input range are not allowed to start, automatic protection, also issued a hasty “beep” Warning
    3. Overheat protection: built-in temperature detection circuit that automatically reduces the output power ESC temperature is too high
    4. Remote signal loss protection: remote control signal is lost for 1 second to reduce the power, and then have two seconds to turn off without the remote control signal output
SKU: OLEC0016 Category:

Description

Brushless ESC Speed Controller

ReadytoSky 80A 2-6S ESC Brushless ESC Speed Controller is specifically made for quadcopters and multi-rotors. Which provides faster and better motor speed control giving better flight performance compared to other available ESCs.

ReadytoSky 80A 2-6 ESC Brushless ESC Speed Controller comes with a multi-integrated special program, fast throttle response, surpasses all kinds of open-source software. Firmware was optimized specifically integrated circuitously for the disc motor, and it has very good compatibility and this Brushless ESC Speed Controller is compatible with 2-6s LiPo Battery.

Due to ultra-low resistance MOSFET, it has a strong flow capacity. With MOSFET special driver integrated circuit, its performance and stability far surpass the driving circuit with discrete components built.

If you are wandering to build a drone and don’t know what will be the best ESC for you then worry no more, we have got your back. At Robu, we have everything for you to get started with your drone project.