-
GT2 Aluminium Timing Pulley 60 teeth 5mm Bore
GT2 toothed pulley with 2mm pitch teeth, suitable for use with GT2 neoprene reinforced nylon or steel reinforced polyurethane belts to be chosen depending on the type of end use. Made entirely of aluminium.
Such a pulley reduces backwash due to accelerations and directional changes, ensuring good resolution when used on automatic system such as 3D printer and small CNC systems.
Features:
- High Quality Aluminium
- Excellently Machined
- Durable and practical
- Minimizes the chance of the belt slipping
- Easy to use
₹205.00 (Price is Exclusive of GST)GT2 Aluminium Timing Pulley 60 teeth 5mm Bore
₹205.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser/Tunnel Control Board with inbuilt IR (InfraRed) Sensor Interface, Relay, Timer Control and Motor Port Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹206.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser/Tunnel Control Board with inbuilt IR (InfraRed) Sensor Interface, Relay, Timer Control and Motor Port Kit
₹206.00 (Price is Exclusive of GST) -
10mm Square Flange Bushing Linear Bearing LMK10LUU
Features :
- Smooth moving
- Low friction
- High rigid
- Long life
- Economical and easy to maintain.
₹206.00 (Price is Exclusive of GST)10mm Square Flange Bushing Linear Bearing LMK10LUU
₹206.00 (Price is Exclusive of GST) -
12mm Square Flange Bushing Linear Bearing LMK12LUU
Features :
- Smooth moving
- Low friction
- High rigid
- Long life
- Economical and easy to maintain.
₹206.00 (Price is Exclusive of GST)12mm Square Flange Bushing Linear Bearing LMK12LUU
₹206.00 (Price is Exclusive of GST) -
Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
- Automatic relay controller board for sanitiser machine
- No extra connections required
- Just connect Ir sensor, water pump and power supply
- Easy to use DIY kit
₹207.00 (Price is Exclusive of GST)Automatic Sanitizer Dispenser Tunnel Control Board with inbuilt Sensor Interface Port for Ultrasonic and IR, Relay, Timer Control and Motor Kit
₹207.00 (Price is Exclusive of GST) -
TEC1 12706 Thermoelectric Cooler 6A Peltier Module
Features:
Colour: white
Material: plastic + ceramics
Rated voltage: 12v
Rated power: 50~72w₹210.00 (Price is Exclusive of GST)TEC1 12706 Thermoelectric Cooler 6A Peltier Module
₹210.00 (Price is Exclusive of GST) -
Waterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
- Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions
- Small size, easy to use
- Operating Voltage: 5 V
- Sonar Sensing Range: 25-450 cm
- Max. Sensing Range: 450 cm
- Frequency: 40 KHz
₹210.00 (Price is Exclusive of GST)Waterproof Ultrasonic Obstacle Sensor, Reversing Radar Sensor with Separate Probe
₹210.00 (Price is Exclusive of GST) -
IMAX B3 7-4V 11-1V Lithium Lipo RC Battery Balance Charge
Input voltage: AC 110V-240V
Balance charge current: 850mA
Display: Green & Red LED
Case: Plastic
Max charge power:10WBalance Charger for 7.4V-11.1V
₹215.00 (Price is Exclusive of GST)IMAX B3 7-4V 11-1V Lithium Lipo RC Battery Balance Charge
₹215.00 (Price is Exclusive of GST) -
BTS7960 Stepper Motor Driver Module 43A H-Bridge High-Power
Features :
- PWM capability of up to 25 kHz combined with active freewheeling.
- Switched mode current limitation for reduced power dissipation in overcurrent.
- Status flag diagnosis with current sense capability.
- Overtemperature shut down with latch behavior.
- Overvoltage lockout.
- Undervoltage shut down.
- Driver circuit with logic level inputs.
- Adjustable slew rates for optimized EMI.
- 74AHC244 Schmitt-trigger Octal buffer/line driver for ESD protection (Inputs accepts voltages higher than VCC).
Input port:
- RPWM: forward level or PWM signal input, active high.
- LPWM: Reverse level or PWM signal input, active high.
- R_EN: forward drive enable input, high-level enable, low level off.
- L_EN: Reverse drive enable input, high-level enable, low level off.
- R_IS: forward drive current alarm output.
- L_IS: Reverse drive current alarm output.
- VCC: +5 V power output, 5V power supply connection with the microcontroller.
- GND: signal common low end.
₹215.00 (Price is Exclusive of GST)BTS7960 Stepper Motor Driver Module 43A H-Bridge High-Power
₹215.00 (Price is Exclusive of GST) -
Orange A Grade ICR18350 3.7V 900mAh 4C Li-ion Battery
- Model No.: ICR18350
- Capacity (mAh): 900mAh
- Minimum capacity: 880mAh
- Nominal Voltage (V): 3.7V
- Discharge voltage: 3.0V
- Max. Charging Voltage (V): 4.20V
₹215.00 (Price is Exclusive of GST)Orange A Grade ICR18350 3.7V 900mAh 4C Li-ion Battery
₹215.00 (Price is Exclusive of GST) -
GT2 Timing Idler Pulley 20 Tooth For 6mm Belt 20 Tooth 5mm Bore-2Pcs
For precise motion control, GT2 belts and pulleys offer excellent precision at a great price. This pulley is meant for use with GT2 6mm wide belts only – MXL belts will slip due to the different tooth profiles.
 Features:
- Adopting high-quality Aluminum Alloy material，sturdy and durable
- Adopt surface oxidation treatment, anti-Rust and Anti-corrosion effectively
₹216.00 (Price is Exclusive of GST)GT2 Timing Idler Pulley 20 Tooth For 6mm Belt 20 Tooth 5mm Bore-2Pcs
₹216.00 (Price is Exclusive of GST) -
Digital Voltage Tester Meter
1.Model Number -Voltmeter usb
2.Measurement Range-3-7.5V
3.Type-Digital
4.Material-plastic
₹217.00 (Price is Exclusive of GST)Digital Voltage Tester Meter
₹217.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
