-
Lithion Power 16S 40A NMC Semi Smart BMS
- 16S battery management system for NMC batteries
- Semi-smart BMS with passive cell balancing
- 20A charging and 40A discharging current
- Overcharge, over-discharge, and short circuit protection
₹1,190.00 (Price is Exclusive of GST)Lithion Power 16S 40A NMC Semi Smart BMS
₹1,190.00 (Price is Exclusive of GST) -
Emax ECOII-2004-3000KV Brushless Motor
Features:
- NSK precision bearing
- Base casing : Al 7075
- Rotor : N52SH arc magnets
- Steel shaft
- 12*12mm hole pattern
- Multi-strand winding
- 120mm 24 AWG silicone wire
Specifications:
- KV: 3000
- Framework: 12N14P
- Length: 19.2mm
- Diameter: 24.7mm
- Cells: 4-6S
- Propeller: 4″-5″
- Prop adapter Shaft Thread: 1.5mm
- Bearing Shaft: 3mm
- Bolt Pattern: M2 (12x12mm)
- Maximum Thrust: 1170g(on4s)
- Peak Current (6S): 32A
₹1,175.00₹1,599.00(Price is Exclusive of GST)Emax ECOII-2004-3000KV Brushless Motor
₹1,175.00₹1,599.00(Price is Exclusive of GST) -
Orange 11.1V 1500mAh 30C 3S Lithium Polymer Battery Pack
Model No: ORANGE 1500/3S-30CVoltage : 11.1VConstant Discharge : 30CMax discharge : 40C (10 sec)Dimensions : 74 x 34 x 23 (LxWxH)(mm )Weight : 115 gm
Charge Rate : 1-3C Recommended, 5C Max₹1,173.00 (Price is Exclusive of GST)Orange 11.1V 1500mAh 30C 3S Lithium Polymer Battery Pack
₹1,173.00 (Price is Exclusive of GST) -
Pro- Range 14.8V 600mAh 25C 4S Lithium Polymer Battery Pack
- Model No: Pro- Range 600 4S
- Voltage: 14.8V
- Max Continuous Discharge: 25C
- Discharge Plug: XT-30
- Dimensions: 60 x 30 x 20 mm
- Weight: 69g
₹1,172.00 (Price is Exclusive of GST)Pro- Range 14.8V 600mAh 25C 4S Lithium Polymer Battery Pack
₹1,172.00 (Price is Exclusive of GST) -
Pro- Range 3.7V 5200mAh 25C 1S Lithium Polymer Battery Pack
- Model No: Pro- Range 5200 mAh 1S 25C
- Product Type: Lithium Polymer Battery Pack
- The Pro- Range LiPo battery has matched resistance.
- Dimensions: 140 x 45Â x 10 mm
- Weight: 145g
₹1,172.00 (Price is Exclusive of GST)Pro- Range 3.7V 5200mAh 25C 1S Lithium Polymer Battery Pack
₹1,172.00 (Price is Exclusive of GST) -
₹1,120.00 (Price is Exclusive of GST)
Quadruped Bionic Smart Robot Dog
₹1,120.00 (Price is Exclusive of GST) -
NEEMA 23-JK57HS51-2804-10.1kg-cm Round Type
Features :
- Comparably more powerful than NEMA17 motors.
- The input pulse decides the rotation angle of the motor.
- High accuracy of around 3 to 5% a step.
- It provides good starting, stopping, and reversing.
- Control of this motor is less costly because of the exclusion of complex control circuitry.
- The speed is proportional to the frequency of the input pulses.
₹1,096.00 (Price is Exclusive of GST)NEEMA 23-JK57HS51-2804-10.1kg-cm Round Type
₹1,096.00 (Price is Exclusive of GST) -
eSun PLA+ 1.75mm 3D Printing Filament 1kg-White
Features:
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- No cracking problem and brittle issue
- Low material shrinkage rate, uniform diameter
Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
₹1,090.00 (Price is Exclusive of GST)eSun PLA+ 1.75mm 3D Printing Filament 1kg-White
₹1,090.00 (Price is Exclusive of GST) -
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Red
Features:
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- No cracking problem and brittle issue
- Low material shrinkage rate, uniform diameter
Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
₹1,090.00 (Price is Exclusive of GST)eSun PLA+ 1.75mm 3D Printing Filament 1kg-Red
₹1,090.00 (Price is Exclusive of GST) -
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Green
Features:
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- No cracking problem and brittle issue
- Low material shrinkage rate, uniform diameter
Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
₹1,090.00 (Price is Exclusive of GST)eSun PLA+ 1.75mm 3D Printing Filament 1kg-Green
₹1,090.00 (Price is Exclusive of GST) -
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Orange
Features:
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- No cracking problem and brittle issue
- Low material shrinkage rate, uniform diameter
Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
₹1,090.00 (Price is Exclusive of GST)eSun PLA+ 1.75mm 3D Printing Filament 1kg-Orange
₹1,090.00 (Price is Exclusive of GST) -
eSun PLA+ 1.75mm 3D Printing Filament 1kg-Silver
Features:
- Consistently High Quality
- Made from great, high-performance materials
- Ready to print on any open source desktop or industrial printer
- Deliver exceptional performance
- 100% bio-degradable and FDA food safety approved
- 10 times stronger than regular PLA on the market
- No wire-drawing problems, the surface of the printouts will be smoother and more delicate
- No cracking problem and brittle issue
- Low material shrinkage rate, uniform diameter
Printing Settings:
- Best Printing Temperature：200-220℃
- Bed Temperature：0-70℃
- Printing Speed：30~90mm/s
- Movement Speed ：90~150mm/s
Maintenance tips:
- Please put the unprinted material in sealed bags, then place it in a cool and dry place to prevent moisture.
- Please insert the wire into the fixed hole of the tray when you don’t use it in case of knotting.
- ABS will produce a slight irritating smell, please print in a well-ventilated environment.
₹1,090.00 (Price is Exclusive of GST)eSun PLA+ 1.75mm 3D Printing Filament 1kg-Silver
₹1,090.00 (Price is Exclusive of GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
