©2019 by OL ELECTRONICS. Developed by OLatus Systems Private Limited

Hc-Sr501 Passive Infrared Pir Motion Sensor

SKU: S009

Introduction: all live objects whose body temperature is more than 0c emits the heat in form of infrared radiation through their body. This radiated signals are invisible to human eye. These signals can be detected by using pir sensor which is specially for such purpose. In passive infrared (PIR) sensor, passive word indicates pir sensor does not generate or radiate any energy for detection purposes. Pir sensors don't detect or measure "heat"; they detect the infrared radiation emitted or reflected from human or animal. Pin description: pin 1 - gnd we have to connect this pin to ground. Pin 2 - output this pin gives output (3.5V) when the motion is detected. Pin 3 - vcc this pin provides supply voltage (+5v) to pir element and internal circuit. Changing sensitivity and delay time: there are two potentiometers on pir motion sensors board: sensitivity adjust and time delay adjust. It is possible to make pir more sensitive or non sensitive enough. The maximum sensitivity can be achieved up to 6 meters. Time delay adjust potentiometer used to adjust the time period tsel shown in above timing diagrams. Clockwise movement leads pir more sensitive.

  • Features :

    • Infrared Sensor with Control Circuit Board
    • The Sensitivity and Holding Time Can be Adjusted
    • Blockade time: 2.5s (Default)
    • Sensitive Setting: Turn to Right, Distance Increases (About 7M); Turn to Left, Distance Reduce (About 3M)
    • Time Setting: Turn to Right, Time Increases (About 200S); Turn to Left, Time Reduce (About 5S).