-
Lithium Battery Charging Protection Board-5V Step-Up Power Module
Lithium Battery Charging Protection Board
- BAT Discharging Stop Voltage:2.9V
- Discharging Efficiency:85%(input 3.7V output 5V/1A)
- Charging and discharging indication
- Internally installed charging and discharging power MOS
- Preset 4.2V charging voltage, precision ±1%
- Max 8uA standby current
- Integration charging management and discharging management
- Intelligent temperature control and overtemperature protection
- Integration output overvoltage protection, short circuit protection, overload protection
₹13.00 (excl. GST)Lithium Battery Charging Protection Board-5V Step-Up Power Module
₹13.00 (excl. GST) -
1S 2A BMS Board 3.7V 18650 Lithium Battery Protection Board
Features:
- Easy to use
- Color: Green
- The internal resistance difference is not more than 5mQ
- BMS Li-ion Battery Protection Board
- The tolerance is less than 30mAh
- Single-cell consumption of battery (self-consumption): ≤3uA
- In this MOSFET are employed to do the monitoring task which protects our battery cells from overcharge
Precautions:1. Before installing the protection board, the battery should be matched well (the voltage difference between each battery should not be 0.05V, the internal resistance difference is not more than 5mQ, the tolerance is less than 30mAh), the smaller the battery voltage difference, the better the protection board will work. .2. The batteries are connected in parallel and then connected in series, and the welding is correct (18650 battery nickel spot welding, other batteries are soldered), do not screw, easy to burn the protection board IC.3. If it is an old battery change board, please pay attention: Please confirm the battery is normal before buying?4. When installing, use a multimeter to check whether the voltage of each string is the same. The performance failures with a difference of more than 1.0V are: running not far, starting and powering off, charging time is short, basically the battery core problem is more. The failure of the protection board is as follows: the battery cannot be charged, and the battery has a voltage and cannot be discharged.₹15.00 (excl. GST)1S 2A BMS Board 3.7V 18650 Lithium Battery Protection Board
₹15.00 (excl. GST) -
9V Watt Battery
- Constant 9V Output till lasts.
- Metal Jacket Body.
- Easy to install and Replace
- Pack of 2 Battery.
₹18.00 (excl. GST)9V Watt Battery
₹18.00 (excl. GST) -
Single cell 18650 Battery Holder
- strong plastic and best quality
- 18650 Battery Holder Case DIY Lithium Battery Box Battery Holder with Pin PCB Mounting type.
₹18.00 (excl. GST)Single cell 18650 Battery Holder
₹18.00 (excl. GST) -
1S 3.7V 3A 2MOS BMS Li-ion 18650 Battery Protection Board
1S 3.7V 3A 2MOS
Features:
- Small size designed for a four-cell battery pack.
- Simple and convenient circuit for easy connections
- Over-charge/Over-discharge Protection.
- Pre-soldered Nickel Strip ready to mount on battery.
₹26.00 (excl. GST)1S 3.7V 3A 2MOS BMS Li-ion 18650 Battery Protection Board
₹26.00 (excl. GST) -
TP4056 1A Li-ion Lithium Battery Charging Module Charging Board Charger Micro USB
- Input interface: Mini USB.
- Current: 1A adjustable.
- Charge precision: 1.5%.
- Input voltage: 4.5V-5.2V.
- Full charge voltage: 4.2V.
- Battery over-current protection: 3 A
- The battery Undervoltage protection:Â 2.5 V
₹30.00 (excl. GST) -
PCB Mounting Type 2 Cell Holder 18650 Battery Holder
- Material Plastic, Steel
- No Soldering Just Plug and Use standatd battery
- High quality and strong material
₹40.00 (excl. GST)PCB Mounting Type 2 Cell Holder 18650 Battery Holder
₹40.00 (excl. GST) -
XT60 Female Connectors-2pcs
 Features:
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash
- Spatial Orientation Straight
- Compatible for Wire size up to 12AWG
₹40.00 (excl. GST)XT60 Female Connectors-2pcs
₹40.00 (excl. GST) -
XT60 Male Connectors-2pcs
Specifications and Features:
- Mechanical mounting for cable
- Electrical mounting soldered
- Contact plating Gold flash
₹40.00 (excl. GST)XT60 Male Connectors-2pcs
₹40.00 (excl. GST) -
Charger Board Protection Module for Lithium Battery 3S 10A 12V 18650
Charger Board Protection
Features :
- Operating current : 6 – 8A.
- Current limit : 10 – 13A.
- Storage condition : -40 ~ +80 ℃.
- Resting current: less than 30uA.
- Effective lifetime: over 30,000 hours.
- Internal resistance: less than 100mΩ.
- Short-circuit protection: protection.
- Self-recovery delay.
₹46.00 (excl. GST)Charger Board Protection Module for Lithium Battery 3S 10A 12V 18650
₹46.00 (excl. GST) -
₹62.00 (excl. GST)3-Cell 18650 Battery Holder Series-Parallel
₹62.00 (excl. GST) -
3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
3 Series 20A 18650
Specifications:
Battery : 3 CellOvercharge detection voltage (V) : 4.25±0.025
Discharge voltage range (V) : 2.3 ~ 3.0±0.05v
Continuous charge current (A) : 20
Operational Temperature (°C) : -40 ~ +50
Length (mm) : 59
Width (mm) : 20
Height (mm) : 4
Weight (gm) : 4
₹70.00 (excl. GST)3 Series 20A 18650 Lithium Battery Protection Board 11.1V 12V 12.6V
₹70.00 (excl. GST)
All Categories
- Atal Tinkering Lab (ATL)
- 3D Printer & Accessories
- Communications & Interfacing
- Connector & Cable Wires
- Consumer Products
- Development Boards
- Educational DIY & STEM Kits
- Electronic Components
- Electronic Modules & Displays
- Mechanical Hardware Tools and Accessories
- Power Supply and Prototypes
- Robotics and Hobbies
- Sensors
- Scientific Tools and Equipments
- Other Tools and Equipment’s
- Bulk/Wholesale
